Canon 2300N Copying Guide for imageCLASS 2300 - Page 17
When scanning is complete, remove your original., If you have set Department ID Management
![]() |
UPC - 750845812596
View all Canon 2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Introduction to Copying Stop 1 F2 F3 F4 Interrupt G If you want to cancel a copy job in the standby mode: ❑ Press [Stop]. The display for selecting a copy job to cancel appears. ❑ Press [F2] (M) or [F3] (L) to select the copy job you want to cancel © press [F4] (CANCEL). The selected job is canceled. NOTE After pressing (Stop), several copies may continue to print out. You can also cancel a copy job from the System Monitor screen. (See "Using the System Monitor Screen," on p. 1-17.) G If you want to interrupt a copy job: ❑ To interrupt a copy job when you need to make priority copies, press [Interrupt]. For instructions on interrupting a copy job, see "Interrupt Mode," on p. 1-20. The message appears on the LCD display. Start ID G If you want to reserve a copy job and scan an original while the machine is printing: ❑ Place your original © press [Start]. For instructions on reserving a copy job, see "Reserved Copying," on p. 1-18. 8 When scanning is complete, remove your original. 9 If you have set Department ID Management, press [ID]. For instructions on using Department ID Management, see Chapter 5, "System Manager Settings," in the Reference Guide. 1-8 Flow of Copy Operations
![](/manual_guide/products/canon-2300n-copying-guide-imageclass-2300-579b6b7/17.png)