Canon 2300N Copying Guide for imageCLASS 2300 - Page 29
Interrupt Mode
UPC - 750845812596
View all Canon 2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Interrupt Mode Introduction to Copying 1 The Interrupt mode enables you to interrupt the reserved or current job that is printing long enough to make higher priority copies. This mode is useful if you need to make a rush copy during a long copy job. NOTE You can make interrupt copies when the machine is ready to scan. COPY Interrupt 1 Press [COPY]. COPY lights, and the Copy Basic Features screen appears. 2 Press [Interrupt]. If you want to make copies after changing the Department ID while Department ID Management is enabled, press ID (ID) © enter the Department ID and password. (See Chapter 2, "Basic Operations," in the Reference Guide.) (Interrupt) lights. NOTE If you press (Interrupt), the current job being output is not interrupted until the interrupt copy starts printing. 3 Place your original, and set the desired copy modes. NOTE To cancel the Interrupt mode, press (Interrupt). 1-20 Interrupt Mode