Canon 2300N Copying Guide for imageCLASS 2300 - Page 48
Auto Zoom, Set the copy ratio using the numeric keys, press [OK]., Press [Start].
UPC - 750845812596
View all Canon 2300N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
@. 1 GHI 4 PQRS 7 ABC DEF 23 JKL MNO 56 TUV WXYZ 89 OPER 0 SYMBOLS OK 3 Set the copy ratio using the numeric keys © press [OK]. If you make a mistake when entering the value, press C (Clear), and enter the correct value. If you enter a value outside the setting range, an error tone sounds. If the value you entered is less than 50, the copy ratio is automatically changed to 50%. If the value you entered is greater than 200, the copy ratio is automatically changed to 200%. Enter a value within the setting range. 2 Basic Copying Features The selected mode is set, the Copy Basic Features screen returns, and the selected copy ratio is displayed. Start 4 Press [Start]. Copying starts. NOTE To return the copy ratio to 100%, press F1 (COPY RATIO) © F1 (DIRECT 100%). To cancel all settings and restore the machine's standard settings, press (Reset). Auto Zoom This mode enables you to have the machine automatically select the appropriate copy ratio based on the size of the original and the selected copy paper. The available copy ratios are from 50% to 200%. IMPORTANT You cannot use the Auto Zoom mode with Automatic Paper Selection. You cannot copy highly transparent originals, such as transparencies, using the Auto Zoom mode. Use the Preset Zoom or Zoom Designation modes. To use the Auto Zoom mode, your originals must conform to a standard paper size: 11'' x 17'', LGL, LTR, LTR , or STMT. COPY 1 Press [COPY]. COPY lights, and the Copy Basic Features screen appears. Changing the Copy (Zoom) Ratio 2-17