Canon 2462B001 PowerShot A590 IS Camera User Guide - Page 157
Subject in recorded image is too bright, or image, flashes white., Image contains noise.
View all Canon 2462B001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
155 Subject in recorded image is too bright, or image flashes white. Subject is too close, making the flash too strong. z Shoot within correct flash range of the subject when using the built-in flash (p. 188). z Adjust the flash output with the flash exposure compensation function (p. 86). z Set the safety FE to [On] (p. 86). The subject is z Set the exposure compensation to a overexposed because the negative (-) setting (p. 99). surroundings are too dark. z Use the spot metering function (p. 100). Too much light is shining z Change the shooting angle. directly into the camera, or is being reflected off the subject. Flash is set to on). (Flash z Set the flash to (Flash off) (p. 60). Image contains noise. ISO speed is too high. z Higher ISO speeds and (High ISO Auto) setting may increase image noise. For higher image quality, use as low an ISO speed as possible (p. 68). z In , , and mode in the mode, the ISO speed increases and noise can appear. Troubleshooting