Canon 2812B004 Quick Start Guide - Page 53
Initial Setting and Installation of Camera, environment. See Notes on Operating Environment
UPC - 013803099478
View all Canon 2812B004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Initial Setting and Installation of Camera Step 3 Perform Initial Setting of the Camera 3. Enter the user name "root" and default password "VB-C60," and then enter the IP address and subnet mask you want to set. If the default gateway is not set, clear the [Enter a default gateway address] check box. When the setting is complete, click [OK]. Note There may be cautionary information that should be heeded depending on your operating environment. See "Notes on Operating Environment" ( P. 1-13) before you perform initial setting. Tip The factory setting Administrator password is "VB-C60". Be sure to change the password for security reasons. See "Administrator Password" ( Operation Guide). The MAC address of this camera is specified at the bottom of the camera ( P. 1-20). The factory setting IP address is 192.168.100.1. Set a proper IP address according to the environment in which the camera is used. For the IP address, subnet mask and gateway address to be set, contact your Network Administrator. 4. The progress of setting is shown in a window. 2-11