Canon 2812B004 Quick Start Guide - Page 57
Step 4 Install the Camera, Note on Use before Installing the Camera
UPC - 013803099478
View all Canon 2812B004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Initial Setting and Installation of Camera Step 4 Install the Camera Note on Use before Installing the Camera Be sure to install the camera after setting the IP address ( P. 2-10). Note The camera will stop issuing IP address assignment requests 20 minutes after its power is turned on and the detection of VB Initial Setting Tool will be disabled. Before installing the camera, set the IP address and check the operation by referring to "Perform Initial Setting of the Camera" ( P. 2-10). The unique MAC address of this camera is specified at the bottom of the camera ( P. 1-20). It is recommended to write down the MAC address before installing the camera. Note For installation or inspection of the VB-C60, consult/request the store where you purchased the product. • Wire the VB-C60 power supply, network, or other cables safely and securely according to the relevant regulations such as technical standards for electrical installations. • When installing the VB-C60, select a ceiling surface, etc., capable of withstanding the total weight of the camera and all options used (Recessed Mounting Kit), provide sufficient reinforcements and use the bundled safety wire if necessary. • To prevent injuries and equipment damage due to falling items, periodically check the brackets and screws for rusting and loosening. • Installation in a place subject to significant vibration is not recommended, because it may cause the equipment to malfunction. • Do not hold the camera head when carrying the network camera. • Do not install the VB-C60 on an unstable or inclined surface. Malfunction may result. 2-15