Canon 2925B002 User Manual - Page 145

Copy Dialog Box Sayfa 145 / 302 sayfa Select how to scan the document. Document Size Select the size of the document to be scanned. When you select Custom, a screen in which you can specify the document size appears. Select a Units, then enter the Width and Height and click OK. Resolution Select the resolution at which to scan documents. The following scanning resolutions can be specified: When Document Type is other than film: 150 dpi/300 dpi/600 dpi When Document Type is film: 300 dpi/400 dpi/600 dpi/1200 dpi/2400 dpi/4800 dpi Resolution Scale Select a scale according to the paper to print on or as required. Select Fit to paper to resize the scanned image automatically to fit to the paper for printing. Since the image's aspect ratio is maintained, margins may appear at the top and bottom or left and right edges of the paper depending on the document and paper sizes. Select Custom to enter a value in Scale. Enter a percentage (25% to 400%) and click OK. Important Scanned images are printed onto paper of a size that can be selected on your printer. For details, refer to the manual of your printer. Brightness Adjust the image brightness. Move the slider to the left to darken and right to brighten the image. Use the scanner driver Select this checkbox to display the ScanGear (scanner driver) screen and make advanced scan settings. Specify... For Document Type, Color Mode, Document Size and Scanning Resolution, the settings specified in the Copy dialog box are displayed. For Descreen, Unsharp Mask, etc., see the corresponding descriptions in " Scan Settings Dialog Box." Printer Settings Paper Size Select the size of paper for printing. Important Selectable paper sizes depend on the selected printer. Number of Copies Specify the number of copies to print. Click (up and down buttons) to the right of the value or enter a value. Specify up to 99 copies. Printer Select a printer to use when multiple printers are connected. Click Properties... to open a dialog box to configure the printer settings. Media Type Select the type of paper to use.