Canon 2925B002 User Manual - Page 284

Scanner Stops Operating during Scanning, or "There is not enough memory."... Sayfa 284 / 302 sayfa On-Screen Manual > Scanning Guide > Troubleshooting > Problems with Scanning Film > Scanner Stops Operating during Scanning, or "There is not enough memory." Message Is Displayed Scanner Stops Operating during Scanning, or "There is not enough memory." Message Is Displayed Check 1: Reduce the resolution or output size and scan again. Check 2: Reduce the number of frames to scan or apply Image Settings (such as Backlight Correction) only to frames that require corrections. Check 3: You may be scanning with ArcSoft PhotoStudio. Scanning data size is limited with ArcSoft PhotoStudio. Scan again using an application other than ArcSoft PhotoStudio. Page top