Canon 2925B002 User Manual - Page 29
Scanning Film
![]() |
View all Canon 2925B002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Scanning Film Sayfa 29 / 302 sayfa On-Screen Manual > Scanning Guide > Let's Try Scanning > Scanning Film Scanning Film Scan 35 mm film strips (negative/positive) or mounted slides (positive). Both film strips (standard state of developed film, with six frames in each strip) and mounted slides (one frame per mounted slide) are supported. Up to six film strip frames or four mounted slide frames can be scanned continuously. Important To scan mounted negative slides, scan from the Advanced Mode tab of ScanGear (scanner driver). Scanning Film in Advanced Mode 35 mm Film Strip 35 mm Mounted Slides 1. Start MP Navigator EX and open the Navigation Mode screen. Starting MP Navigator EX 2. Point to Scan/Import and click Film. 3. Place the film on the Platen. Placing Film 4. Click Specify... to set the document size and scanning resolution as required. The Scan Settings Dialog Box (Film) opens. Important Film may not be scanned correctly when Film Type in the Scan Settings dialog box is set to Auto. In that case, select the type of film in Film Type and scan again. Note To scan black and white film, it is recommended that you select Black and White Negative Film or Black and White Positive Film for Film Type in the Scan Settings dialog box. 5. Click Scan. Preview scan starts.
![](/manual_guide/products/canon-2925b002-user-manual-cc2f1a8/29.png)