Canon 2925B002 User Manual - Page 221

Scanner Tab On-Screen Manual > Scanning Guide > ScanGear (Scanner Driver) Screens > Scanner Tab Scanner Tab On the Scanner tab, you can specify the following settings. Sayfa 221 / 302 sayfa Energy Saving Mode Shut Off Lamp Time Specify the time after which the lamp turns off. The time is set to 12 minutes by default. Note You can specify the time in 4 minute increments within the range of 4 minutes to 56 minutes. If an invalid time is entered, it is adjusted to the nearest shorter valid time. (For example, if you enter 15, the time will be set to 12 minutes.) Quiet Mode Select this checkbox to reduce scanner sound by slowing down the scanner head when previewing or scanning documents. This checkbox is not selected by default. Note Scanning takes longer than usual when you enable this function. Select Folder Where Temporary Files are Saved Displays the folder in which to save images temporarily. To change the folder, click Browse... to specify another one. Sound Settings You can set the machine to play music during/at the end of a scan. Select the Play Music During Scanning or Play Sound When Scanning is Completed checkbox, then click Browse... and specify a sound file. You can specify the following files. MIDI file (*.mid, *.rmi, *.midi) Audio file (*.wav, *.aif, *.aiff) MP3 file (*.mp3) Calibration Settings Platen Calibration/Film Calibration Click OK to start the calibration. The scanner will be calibrated to reproduce correct color tones in scanned images. Perform calibration when the color tone of the preview image is significantly different from the source document, or when colors appear in white portions.