Canon 8089A004 EOS Rebel Ti manual - Page 41
Depth-of-field Preview
UPC - 081097003402
View all Canon 8089A004 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
4 Check the viewfinder display and take the picture. • If the shutter speed display does not blink, a correct exposure will be obtained. • If the slowest shutter speed blinks, it indicates underexposure. In such a case, turn the < > dial to set a larger aperture (smaller f/number) until the shutter speed display stops blinking. • If the fastest shutter speed blinks, it indicates overexposure. In such a case, turn the < > dial to set a smaller aperture (larger f/number) until the shutter speed display stops blinking. Aperture Display The aperture can be set and displayed in full and half stops as shown below. The larger the number, the smaller the aperture opening will be. The displayable range of apertures depends on the lens mounted on the camera. Depth-of-field Preview To check the depth of field, press the depth-of-field preview button. The camera will stop down the aperture and you can check the in-focus range in the viewfinder. • This feature works in Creative Zone modes. • When you press the depth-of-field preview button, AE lock also takes effect. • In the < > mode, press the shutter button halfway to focus, then keep pressing the shutter button halfway and press the depth-of-field preview button. 41