Canon C50i User Manual - Page 115
Create a motion detection area Area tab, Setting the level of motion detection for the motion
![]() |
UPC - 013803054415
View all Canon C50i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Schedule Setting Tool The frame rate specified in the "Maximum Frame Rate" (→ P.3-18) must be higher Note than the one specified using this tool. ● When the network traffic is high, the specified frame rate may not be achieved. Tip ● When a slow frame rate is set, motion detection is applied to images sampled from the captured video. In this way, motion can be detected even in slowly moving objects. ● The frame rate specified above only applies to the motion detection. 3. Create a motion detection area (Area tab) Create an area in the viewer within which motion detection is to be performed (motion detection area). You can create a maximum of 4 motion detection areas, and reshape and move each area frame by dragging the mouse. Change the shape by dragging the black boxes on the 4 corners and sides of the frame, and move the frame by dragging the inside of it with the mouse. Also, you can set a separate level of motion detection in each area. See step 4 for how to set up the level of motion detection. q Used Area Check the number of the motion detection area to be used q and the detection area frame is displayed in the Viewer. w You can create a maximum of 4 motion detection areas. e r t y u VB Administration Tools 4. Setting the level of motion detection for the motion detection area (Area tab) These settings determine how great the variation must be (sensitivity), how large the changed area must be as a proportion of the whole detection area (area ratio), and how long the variation must continue (duration) before it is recognized as motion and the specified action is performed. You can also set the level of motion detection for the device by checking in Video Mode the image recorded with Live Mode (→ P.4-51). w Setting Area If you have created two or more motion detection areas, you can set separate levels of motion detection in each area frame. In Setting Area, select a setting number. e Sensitivity Select the sensitivity of the motion detection in a range of 1-256. Either enter the setting or set sensitivity by dragging the slide bar. The larger the numeric value, the higher the degree of sensitivity will be. Continued on the following page. a 4-45
![](/manual_guide/products/canon-c50i-user-manual-d0e49cf/115.png)