Canon C50i User Manual - Page 37

Setting Up 3. Perform Initial Settings for the Camera 5. A setup progress window appears and your settings will be saved. ● Set the IP address to a value that suits your environment. Note ● Where the IP address has been automatically obtained from the DHCP server, you cannot change the IP address setting from the VB Initial Setup Tool. Change the IP address from the Network Settings page (→ P.3-6). ● Please consult with your network administrator for the IP address, subnet mask and default gateway address settings. ● If 20 minutes or more have passed since the VB-C50i/VB-C50iR was turned on, the VB-C50i/VB-C50iR stops sending requests for IP addresses allocation and they cannot be detected using this tool. If this occurs, restart the VB-C50i/VB-C50iR. ● To restore the factory default settings, refer to page 7-21. ● If you are using the Multi-Terminal Module and are changing the connection of the VB-C50i/VB-C50iR and external camera, be sure to do this after having turned off the power of these 2 devices. After changing the connection, turn on the external camera first and then the VB-C50i/VB-C50iR. Initial settings are now complete. 2-9