Canon C50i User Manual - Page 119
This completes the settings for motion detection.
UPC - 013803054415
View all Canon C50i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
VB Administration Tools Schedule Setting Tool 8. Check motion detection status in the server. To confirm the operating level of motion detection with the settings you have made, check "Display motion detection status of the server". Motion detection status is displayed as the icon below. You cannot save the settings with "Display motion detection status of the server" checked. Remove the check to save the settings. [Detection disabled] [Detected] [Not detected] ● Because the video distribution frame rate may be lowered when the data is sent Note via a proxy server, connection without using a proxy server is recommended while setting the motion detection. ● The motion detection settings should be adjusted and set in conditions that are as close as possible to those for actual operation. ● For detailed information on specifying the settings, see Page 6-8. ● Please note that each result of the following features may not match completely: Tip the "Motion detected (peak block)" shown in this tool, the motion detection status of the server and actual status of motion detection. ● When "Display motion detection status of the server" option is selected, external device and log output, and picture recording are not performed. ● Because the Motion Detection Function detects motion by comparing consecutive image frames, small movements are less likely to be detected when the video quality (→ P.3-7) is poor. ● When the VB-C50i/VB-C50iR Motion Detection Function is enabled, the processing load on the VB-C50i/VB-C50iR is high. Consequently, the video distribution frame rate may be lowered than when the function is disabled. 9. Click the "Save Settings" button in the Schedule Setting screen to save the settings, and close the Motion Detection Setting screen. This completes the settings for motion detection. 4-49