Canon CanoScan LiDE 500F CanoScan LiDE500F Quick Start Guide - Page 18

Scanning Film Scanning Film 1 Place the film in the film guide. Place the film face up in the film guide (images and words should read correctly from above) with the spaces between frames aligned with the white lines on the guide. White Line 2 Remove the cap from the film adapter unit and gently set the unit over the frame you wish to scan. Align the tab on the film adapter unit with the film guide. • Do not move the film adapter unit once it has been placed on the fIlm guide. Sliding it may scratch the film. 3 Gently close the document cover. • The document cover does not touch the document glass completely. Be careful not to force the document cover down. 4 Start ArcSoft PhotoStudio. Refer to step 2 on page 12. 5 Start ScanGear CS. Refer to step 4 on page 13. 6 Select a Select Source option. You can select from the following options for films. Negative Film (Color) / Positive Film (Color) • Use ScanGear CS's Advanced Mode to scan monochrome films (See the Scanning Guide.). 18