Canon CanoScan LiDE 500F CanoScan LiDE500F Quick Start Guide - Page 21

English Specifications Specifications Scanner Type Flatbed Scanning Element CIS (Color Contact Image Sensor) Light Source 3-color (RGB) LED Optical Resolution 2400 x 4800 dpi Selectable Resolution 25 - 19200 dpi (ScanGear CS) Scanning Bit Depth Scanning Speed *2 (Photo or Document) Scanning Speed *2 (Film) Preview Speed *3 Color Grayscale Color Grayscale, B&W 16 bit input/16 bit or 8 bit output for each color (RGB) 16 bit input/16 bit or 8 bit output *1 10.38 msec./line (1200 dpi), 20.7 msec./line (2400 dpi) 4.98 msec./line (1200 dpi), 6.9 msec./line (2400 dpi) 5.16 - 82.56 msec/line Approximately 9 sec. Interface USB 2.0 Hi-Speed/USB (USB 1.1 equivalent) Maximum Document Size Film Type/Number of Frames A4/Letter: 216 x 297 mm 35 mm strip (negative/positive) *4 / 1 frame Scanner Buttons Operating Range Temperature Humidity 4 buttons: COPY, SCAN, PDF, E-MAIL 5°C to 35°C (41°F to 95°F) 10% to 90% RH, 20% to 80% RH when scanning film (without condensation formation) Power Requirements Supplied via USB port (No external adapter required) Power Consumption In operation: 2.5 watts maximum, Stand-by: 1.4 watts Maximum Exterior Dimensions 280 x 396.5 x 34.9 mm Weight Approximately 2.0 kg *1 16 bit output supported for film scanning only. *2 The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included. *3 Calibration processing time is not included. *4 35 mm slides not supported. • Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported. • Specifications are subject to change without notice. Optional Accessory Kit • You can purchase the following Accessory. Accessory Kit CSAK-LiDE 500F : film guide, cap for film adapter unit Upgrading to USB 2.0 (Windows Only) To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs that have been verified by Canon for compatibility. Expansion Cards Hubs • Adaptec USB2connect 5100 • PCI bus Adaptec XHUB4 • Adaptec USB2connect 3100LP • PCI bus Adaptec XHUB4PLUS • Adaptec USB2connect 2000LP • PCI bus Adaptec XHUB7PLUS • Adaptec DuoConnect: PCI bus For installation procedures, please read the instructions that accompany the USB expansion card/hub. • After upgrading to Windows XP, reinstall ScanGear CS and CanoScan Toolbox according to the steps on page 4. 21