Canon Canon CX-G6400 4 Inkjet Card Printer CX-G6400 Users Guide - Page 187
Monitor's [Cancel Print Job], If the same error occurs again
View all Canon Canon CX-G6400 4 Inkjet Card Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
List of Error Messages/Warning Messages Error Message Paper Length difference X ("X" represents number) Paper Width difference Paper jam XX ("XX" represents numbers) Feeder tray overloaded Error Content Handling The length of the paper that is set differs from the paper size set in the application software or printer driver. If the paper is different, replace with the proper paper. If the application software or printer driver's configuration is different, click on the Status Monitor's [Cancel Print Job] and print again after correctly configuring the paper size. The width of the paper that is set differs from the paper size set in the application software or printer driver. If the paper is different, replace with the proper paper. If wrong paper is loaded or the side guide is displaced, replace with correct paper or move the side guide to the correct position. If the application software or printer driver's configuration is different, click on the Status Monitor's [Cancel Print Job] and print again after correctly configuring the paper size. The transport area, feeder slot, or paper delivery slot is clogged with paper. Remove the paper jam and reload the paperʢ. ˠ P.15ʣ If the same error occurs again, update the printer drivers and firmware to the latest versions. The amount of paper loaded in the feeder lift tray is over the limit. Load paper so that the number of sheets is less than the specified amount and the top surface of the paper stack is lower than the paper loading limit markʢ. ˠ P.28ʣ 183