Canon EOS-1Dx Mark II User Manual - Page 425

3 Custom Function Settings Number of bracketed shots C.Fn1 The number of shots taken with AEB and white balance bracketing can be changed from the default 3 shots, to 2, 5, or 7 shots. When [81: Bracketing sequence: 0, -, +] is set, the bracketed shots will be taken as shown in the table below. 3: 3 shots 2: 2 shots 5: 5 shots 7: 7 shots (1-stop/step increments) 1st Shot 2nd Shot 3rd Shot 4th Shot 5th Shot 6th Shot 7th Shot 3: 3 shots Standard (0) -1 +1 2: 2 shots Standard (0) ±1 5: 5 shots Standard (0) -2 -1 +1 +2 7: 7 shots Standard (0) -3 -2 -1 +1 +2 +3 If [2 shots] is set, you can select the + or - side when setting the AEB range. With WB bracketing, the 2nd shot will be adjusted toward the minus direction for either B/A or M/G. Spot metering link to AF point C.Fn1 You can enable AF point-linked spot metering in the shooting mode. Center AF point only Regardless of the AF area selection mode and selected AF point, the spot metering will always be performed at the viewfinder center. Linked to active AF point Spot metering will be linked to the manually-selected AF point. If the AF area selection mode has been set to Automatic selection AF, Zone AF, or Large Zone AF, spot metering will be performed at the viewfinder center. With an external Speedlite, you can use FE lock linked to a manually selected AF point. (You can also use it for metered manual flash exposure (p.262).) 425