Canon EOS C700 FF EOS C700 EOS C700 PL EOS C700 GS PL EOS C700 FF EOS C700 FF - Page 153
Using the MON. Terminals, About RAW output
View all Canon EOS C700 FF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Connecting to an External Monitor or Recorder NOTES • Depending on the external recorder, you may not be able to record at the desired video configuration. • After you connect the camera to the external recorder, make a test recording first to check that audio and video are recorded correctly on the external recorder. • You can set [Rec/Media Setup] > [Rec Command] to [On] to use the camera's REC button to control also the recording operation of an external recorder connected to the SDI OUT terminals and MON. terminals. • About RAW output: - A special gamma curve optimized for RAW video is applied to the video output. - During RAW output, the audio output signal will be 2-channel linear PCM audio (16 bit). We recommend using instead the 4-channel linear PCM audio (24 bit) that is recorded in the camera with sub recording (XF-AVC Intra) clips. - The output signal mapping will be set to Level B. • When 2K RGB 4:4:4 video is being output from the SDI OUT terminals, video output from the MON. terminals will be a 2K YCbCr video signal. 153 Using the MON. Terminals The digital signal that is output from the MON. terminals includes the video signal, audio signal (4 channels), time code, metadata and clip file name information*. Additionally, you can output also the camera's onscreen displays and various assistance displays (onscreen markers, zebra patterns, peaking, magnification, false color display, black & white image). * If the main recording format is set to [ProRes (CFast)] but no CFast card is inserted in the camera, clip file name information will not be output. 1 Activate the MON. terminals and select the desired output mode. [System Setup] (B) > [Term. Output Setup] > [MON. Output] > [1920x1080] or [2048x1080/1920x1080] • If you have no intention to use the MON. terminals, select [Off] instead. 2 If you selected 2K output, you can select the 3G-SDI mapping level for the output signal. From the same submenu: [3G-SDI Mapping] > [Level A] or [Level B] • The options correspond to a video output signal compliant with Level A or Level B of the SMPTE ST 425 standard. Options [2048x1080/1920x1080]: Outputs video with a resolution of 2048x1080 or 1920x1080. [1920x1080]: Outputs 1920x1080 (Full HD) video. When the horizontal resolution of the main recording video configuration is 4096 or 2048, the sides of the image will be displayed letterboxed. NOTES • You can set [Rec/Media Setup] > [Rec Command] to [On] to use the camera's REC button to control also the recording operation of an external recorder connected to the SDI OUT terminals and MON. terminals. However, this is not available from the MON. terminals when the sensor mode is set to [Full Frame] and the frame rate is set to 59.94P or 50.00P.