Canon EOS Digital Rebel XT EF-S 18-55 Kit EOS DIGITAL Rebel XT / EOS 350D Inst - Page 157

Error Codes

Page 157 highlights

Troubleshooting Guide Direct Printing The images cannot be printed. ¡ The camera is not properly connected to the printer. s Use the specified cable to properly connect the camera to the printer. (p.122) ¡ The printer is not turned on. s Turn on the printer. Error Codes If a camera error occurs, "Err xx" will be displayed on the LCD panel. Follow the countermeasures below to resolve the problem for respective error code. If the same error occurs often, something is probably wrong with the camera. Jot down the "xx" error code and contact your nearest Canon Service Center. If an error code appears after you take the picture, the camera might have missed the shot. Press the button to see if the image appears on the LCD monitor. Error Code Err 01 Err 02 Err 04 Err 05 Err 99 Countermeasures Communications between the camera and lens is faulty. Clean the lens contacts. (p.9) There is a problem with the CF card. Try any of the following: Remove and re-insert the CF card. Format the CF card. Use a different CF card. The CF card is full. Erase unnecessary images in the card or replace the CF card. Something obstructed the built-in flash's automatic pop-up operation. Turn the power switch to and again. An error other than the above has occurred. Remove and re-install the battery. This error may occur if you use a non-Canon lens and the camera or lens does not operate properly as a result. 157

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172

157
Troubleshooting Guide
¡
The camera is not properly connected to the printer.
s
Use the specified cable to properly connect the camera to the
printer. (p.122)
¡
The printer is not turned on.
s
Turn on the printer.
Direct Printing
The images cannot be printed.
Error Code
Countermeasures
Err 01
Communications between the camera and lens is faulty.
Clean the lens contacts. (p.9)
Err 02
There is a problem with the CF card. Try any of the following:
Remove and re-insert the CF card. Format the CF card. Use a
different CF card.
Err 04
The CF card is full. Erase unnecessary images in the card or
replace the CF card.
Err 05
Something obstructed the built-in flash’s automatic pop-up
operation.
Turn the power switch to <
2
> and <
1
> again.
Err 99
An error other than the above has occurred.
Remove and re-install the battery.
This error may occur if you use a non-Canon lens and the
camera or lens does not operate properly as a result.
If a camera error occurs, “
Err xx
” will be displayed on the LCD panel.
Follow the countermeasures below to resolve the problem for
respective error code.
If the same error occurs often, something is probably wrong with the
camera. Jot down the “
xx
” error code and contact your nearest Canon
Service Center.
If an error code appears after you take the picture, the camera might
have missed the shot. Press the <
x
> button to see if the image
appears on the LCD monitor.
Error Codes