Canon EOS R5 C Advanced User Guide PHOTO edition - Page 531
Select [Auto send]., Enable, Restart the camera., Switch network, Clear camera web link settings,
View all Canon EOS R5 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 531 highlights
12. Select [Auto send]. Once [Enable] is set, images are automatically sent when you turn the camera on. 13. Restart the camera. The images are now sent automatically. To switch networks, select [Switch network] and follow steps 5-8. To remove the connection, select [Clear camera web link settings] and then [OK]. Note All image files on cards are sent when [Auto send] is set to [Enable]. When [Auto send] is set to [Enable], auto send starts after the camera starts up (or recovers from auto power off). Any images captured during auto sending are also sent. Caution Auto send does not start during interval timer shooting. Transfer stops in the following cases. • [Airplane mode] is set to [On] • A USB connection is started • Battery capacity is low • The camera's power switch is set to < > 531