Canon EOS R5 C Advanced User Guide PHOTO edition - Page 662
and shutter curtains.
View all Canon EOS R5 C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 662 highlights
4. End the cleaning. Set the power switch to < >. Note Using the household power outlet accessories (sold separately) is recommended. Caution While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close. These may result in damaging the image sensor and shutter curtains. • Setting the power switch to < >. • Removing or inserting the battery. The surface of the image sensor is extremely delicate. Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor. Do not insert the blower tip inside the camera beyond the lens mount. If the power is turned off, the shutter will close and the shutter curtains may get damaged. Never use pressurized air or gas to clean the sensor. Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended. 662