Canon EOS Rebel T5i 18-55mm IS STM Lens Kit Instruction Manual - Page 281

wPictBridge Preparing to Print 6 Play back the image. Press the button. X The image will appear, and the icon will appear on the upper left to indicate that the camera is connected to a printer. Before using the printer, make sure it has a PictBridge connection port. Movies cannot be printed. The camera cannot be used with printers compatible only with CP Direct or Bubble Jet Direct. Do not use any interface cable other than the one provided. If there is a long beeping sound in step 5, it indicates a problem with the printer. Resolve the problem displayed in the error message (p.288). Printing is not possible if the or shooting mode or Multi Shot Noise Reduction has been set. You can also print 1 images taken with this camera. If you use a battery pack to power the camera, make sure it is fully charged. With a fully-charged battery, printing up to approx. 3 hr. 30 min is possible. Before disconnecting the cable, first turn off the camera and printer. Hold the plug (not the cord) to pull out the cable. For direct printing, using AC Adapter Kit ACK-E8 (sold separately) to power the camera is recommended. 281