Canon Elan IIe Instruction Manual - Page 41
Turn
UPC - 082966804939
View all Canon Elan IIe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CRL - \ I/ \ I/ - 0- 0 0 ' I N. III. AF Modes and Metering Modes 2Turn the Main Dial to select a blinking calibration No. • If none of the calibration numbers blink when selected, see -Deleting a Calibration Setting" on page 45. 3 Look through the viewfinder. 4 Look at the blinking focusing point on the right and press the shutter button. • The beeper will sound. Keep looking at the right focusing point for 1 to 2 sec. until it stops blinking. • If the Custom Function has been set to silence the beeper, the beeper will not sound during the calibration process (page 78). 5 Release the shutter button. The left focusing point will then start blinking. Look at the blinking focusing point on the left and press the shutter button. After 1 or 2 sec., the beeper will sound. This completes the horizontal calibration. • When the calibration is completed, the left focusing point stops blinking and stays lit. "End-- is also displayed in the viewfinder and on the LCD panel. • If you stop the calibration process midway, wait until the focusing point lit in red in the viewfinder turns off. Then press the shutter button and start from step 3 above. 41