Canon Elan IIe Instruction Manual - Page 42
Calibration, Vertical, Framing, Teaching, Controlled, Autofocus
![]() |
UPC - 082966804939
View all Canon Elan IIe manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
III. AF Modes and Metering Modes Calibration for Vertical Framing / I • 6 Press the shutter button halfway, hold the camera vertically, and press the shutter button completely. Then 0 calibrate by following steps 1 to 5 above. You should use the same calibration No. that was used for horizontalframe calibration. • When the camera is held vertically, the top focusing point will start blinking first regardless of whether the camera grip is facing up or down. 7To take pictures, set the Command Dial to a mode except CAL and CF. [;] • If the beeper sounds intermittently and the LCD panel display blinks, press the shutter button again and start again from step 1. • When the calibration is completed, Eye-Controlled focusing point selection will be set automatically. Self-Teaching Eye-Controlled Autofocus • The camera accumulates eye movement data which is added to the calibration setting. Different eye movements for different situations (outdoors, indoors, night, daytime, vertical and horizontal framing) are noted to improve Eye-Controlled Autofocus precision. • Avoid having two people use the same calibration No. Doing so will reduce EyeControlled Autofocus precision. The second person should either use another calibration No. or delete the calibration setting before calibrating it for him or herself. 42
![](/manual_guide/products/canon-elan-iie-instruction-manual-a486de3/42.png)