Canon FAXPHONE B640 User Manual - Page 86
Rx Settings
View all Canon FAXPHONE B640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Settings RX SETTINGS Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 73 and 74. Name Description Settings ECM RX FAX/TEL SWITCH Enable/disable error correction during reception. Enable/disable FAX/TEL switchover. When ON, this feature answers calls, and if no fax tone is detected, the FAXPHONE rings to alert you of an incoming call. ON/OFF RING START TIME F/T RING TIME Set the duration that the FAXPHONE listens for a fax tone before starting to ring. Set the length of time the FAXPHONE will ring to alert you of an incoming call. 8 seconds (0 to 30) 15 seconds (10 to 45) F/T SW ACTION INCOMING RING Select the action taken after the F/T RING TIME expires. When the FAXPHONE is set to Fax Only Mode or Fax/Tel Mode and an extension phone is connected, set the FAXPHONE to ring when it receives a call. DISCONNECT/RECEIVE ON/OFF RING COUNT Set the number of incoming rings before the FAXPHONE answers. 2 times (1 to 99) MAN/AUTO SWITCH Determine if the FAXPHONE switches to document receive ON/OFF mode after the FAXPHONE rings for a specified time when 7 the FAXPHONE is in the manual receive mode. RING TIME Set the amount of time the FAXPHONE will ring before switching to document receive mode. 10 seconds (1 to 99) MEMORY RX Turn on/off memory receiving of a document. ON/OFF DRPD Enable/disable the Distinctive Ring Pattern Detection (DRPD) feature and assign a setting mode to each ring pattern. See p. 22. ON/OFF NORMAL RING DOUBLE RING SHORT-SHORT-LONG SHORT-LONG-SHORT OTHER RING TYPE TEL-FAX-FAX/TEL SWITCH TEL-FAX-FAX/TEL SWITCH TEL-FAX-FAX/TEL SWITCH TEL-FAX-FAX/TEL SWITCH TEL-FAX-FAX/TEL SWITCH 77