Canon FS30 FS30 / FS31 / FS300 Instruction Manual - Page 96
Messages Related to the Optional DW-100 DVD Burner
View all Canon FS30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Additional Information WHILE THE CAMCORDER IS CONNECTED TO A PC DO NOT DISCONNECT THE USB CABLE OR POWER SOURCE CANNOT TURN OFF POWER OR CHANGE MODES - When the camcorder is in mode and is connected to the computer with a USB cable, the camcorder cannot be operated. Disconnecting the USB cable or power source while this message appears may result in permanent loss of the recordings in the camcorder. Use the computer's Safely Remove Hardware function to end the connection and disconnect the USB cable before using the camcorder. Messages Related to the Optional DW-100 DVD Burner If a message appears while the camcorder is connected to the optional DW-100 DVD Burner, refer to the following section and also to the instruction manual of the DVD burner. CANNOT READ THE DISC CHECK THE DISC - During disc recording mode, this message can appear when a commercially available DVD disc (a DVD disc containing movies, software, etc.) or an 8 cm mini DVD disc is inserted. - During disc playback mode, this message can appear when a commercially available DVD disc or a brand new DVD disc is inserted. CLOSE THE MEMORY CARD SLOT COVER - The memory card slot cover is open. Close the cover after correctly inserting the memory card ( 30). CONNECT THE COMPACT POWER ADAPTER - The camcorder is being powered by the battery pack. Connect the compact power adapter to the camcorder. DISC ACCESS FAILURE CHECK THE DISC - There was an error when reading the disc or attempting to write onto it. - This message can also appear if condensation has formed. Wait until the DVD burner dries completely before resuming use ( 102). - The disc may not be loaded correctly. Try removing the disc and reinserting it. ERROR READING THE DATA - Error while reading the recordings from the camcorder. - Check that the USB cable was not accidentally disconnected. LOADING THE DISC - Reading data from the disc. NO DISC - Insert a disc into the DVD burner. - This message can also appear if condensation has formed. Wait until the DVD burner dries completely before resuming use ( 102). NO PHOTOS - There are no photos to add to the disc. NO SCENES - There are no movies to add to the disc. NO SCENES LEFT TO ADD - You selected to create a DVD with the [REM.SCENES] setting, but all the scenes have already been added to discs created in the past; there are no applicable scenes. 96