Canon GL1 GL1 Instruction Manual - Page 19
Loading a Cassette - flashing
View all Canon GL1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Loading a Cassette EJECT CPLUOSSHE THIS FIRST. E Quick Overview OPEN PUCSLOHSE THIS FIRST. Only use videocassettes marked with the D logo.* Loading and unloading 1. Make sure that you have attached a power source. 2. Slide the OPEN button across to release the cover. • Pull the cover fully open (while holding the button in the OPEN position). 3. Press the EJECT 5 button and wait for the cassette compartment to open. • The confirmation beep sounds. 4. Load or unload the cassette. • Insert the cassette gently with the window facing out and the REC/SAVE tab to the top. • Remove the cassette by pulling it straight out. 5. Press the P mark on the compartment until it clicks. 6. Click the cover back into place. * D is a trade mark. Notes: • After loading a cassette, use record search (p. 47) to find the point where you want to start recording. • Do not interfere with the cassette compartment while it is opening or closing, or attempt to close the cover. • Be careful not to get your fingers caught in the cassette compartment cover. • Do not leave the cassette in the camera after use - return it to its case and store it in a cool, clean, dry place. • When a cassette is not loaded, v flashes in the display. • With some types of tapes, the remaining tape display may not give an accurate reading (p. 95). 19