Canon IR5000 User Guide - Page 296
Interrupting the Current Job to Make Priority, Copies, Interrupt Mode - user guide
UPC - 750845835069
View all Canon IR5000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 296 highlights
Interrupting the Current Job to Make Priority Copies (Interrupt Mode) The Interrupt mode enables you to interrupt the reserved or current job long enough to make other priority copies. This mode is useful when making a rush copy during a long copy job. IMPORTANT • When making interrupt copy while the user restrictions are enabled with the control card, make copies without exchanging the control cards. NOTE • You can make interrupt copies if the machine is ready to scan. • You can set the modes for the Interrupt copy even while an original is being scanned into memory or into a box. 1 Interrupt Press the key. The Interrupt key remains constantly lit. NOTE • When you want to copy after changing the Department ID while the Department ID Management is enabled, press the ID key and enter the Department ID and Password. (See "Entering the Department ID and Password," on p. 10-4.) • Even when you press the Interrupt key, the job currently being output will not be interrupted until the interrupt copy starts. 1 Guide ?4 Additional Functions 7 Interrupt ID 23 56 89 Clea 0C Interrupt Mode Processing /Data Error 2 Place your original, then set the necessary copy mode. NOTE • You can cancel the Interrupt mode by pressing the key. Interrupt • You can cancel only the copy mode by pressing the Reset key. (The Interrupt mode will not be can canceled.) 5 Printing Efficiently Interrupting the Current Job to Make Priority Copies (Interrupt Mode) 5-3