Canon IR5000 User Guide - Page 444

Message/ Cause Remedy Remove the paper from the output tray. Prints from the previous job remain in the output tray. Remove the prints from the output tray, then press Start the key. Attach the finisher to the main unit. The Finisher is not properly connected to the main unit. Connect the Finisher to the main unit properly. Paper is jammed in the indicated location. Remove the jammed paper. An original jam or paper jam has occurred, preventing you from making prints. Remove paper from the machine following the guidance messages in the touch panel display. (See "Removing Paper Jams," on p. 8-2.) Add toner. There is not enough toner to print. Add toner using the toner bottle recommended for use on this machine. (See "Adding Toner," on p. 7-8.) 8 Troubleshooting Self-diagnostic (Error) Display 8-33