Canon IR5000 User Guide - Page 443

Self-diagnostic (Error) Display Self-diagnostic (error) messages appear in the touch panel display at the following times: • When printing cannot be performed because of an operational error. • When you need to make a judgment or take some action during scanning or printing. If a self-diagnostic message appears, follow the instructions in the touch panel display. Message/ Cause Remedy Add paper. The machine has run out of paper. No more prints can be made. The paper drawer is not correctly inserted. Load paper. (See "Loading Paper," on p. 7-2.) Insert the paper drawer as far as it will go. (See "Loading Paper," on p. 7-2.) Load LTR-size paper. The paper drawer loaded with the best paper size selected by the Automatic Paper selection is not inserted into the machine. Load the indicated paper size in a paper drawer. If you press the Start key while this message is displayed, print will be made with the currently selected paper size. If the message remains even when the indicated paper is loaded, set the Drawer Eligibility of that paper drawer to On . (See "Setting a Paper Drawer for Auto Paper Selection/Auto Drawer Switching," on p. 6-10.) Return page 1 to the top, and then press the Start key. Scanning was stopped due to a problem with the Feeder. Arrange the originals in page order with the first page on top. Place the originals back in the Feeder original supply tray, then press the Start key. 8 Troubleshooting 8-32 Self-diagnostic (Error) Display