Canon PIXMA MX320 Getting Started - Page 11

6 Set Up for Fax Reception 1 2 3 4 567 8 If you are not using the machine as a fax, go to "7 Install the Software" on page 11. Select a receive mode according to your needs to receive faxes easily. You can change the receive mode any time. For details, refer to the on-screen manual: Basic Guide. When using as a fax only: When using as both a fax and telephone: When you want to receive only faxes (FAX only mode) When you want to switch the line between fax and telephone automatically (FAX priority mode) When you receive more voice calls than faxes (TEL priority mode) If you use Distinctive Ring Pattern Detection (DRPD) service When a call arrives: When a call arrives: When a call arrives: When a call arrives: Voice call: You cannot answer the call. Voice call: The machine rings. Pick up the handset, then press the Stop button to answer the call. Voice call: Pick up the handset to answer the call. Voice call: The telephone continues to ring. Pick up the handset to answer the call. Fax call: The machine does not ring. Faxes are received automatically. Fax call: The machine does not ring. Faxes are received automatically. Fax call: If you pick up the handset and hear the fax tone, the machine will switch to the fax automatically and receive the fax. Fax call: Faxes are received automatically when the machine detects the fax ring pattern. • When a telephone is connected to the machine, the telephone rings for incoming calls regardless of the selected mode.