Canon PIXMA MX7600 Quick Start Guide

Canon PIXMA MX7600 Manual

Get Canon PIXMA MX7600 PDF manuals and user guides View all Canon PIXMA MX7600 manuals
Add to My Manuals
Save this manual to your list of manuals

Canon PIXMA MX7600 manual content summary:

  • Canon PIXMA MX7600 | Quick Start Guide - Page 1
    Office All-In-One Quick Start Guide series
  • Canon PIXMA MX7600 | Quick Start Guide - Page 2
    and comprehensive self-help in an intuitively guided interactive troubleshooting environment, the place to start is our helpful tech support web site. In addition, the latest driver downloads, answers to frequently asked questions, product information, and "where to buy" instructions are found here
  • Canon PIXMA MX7600 | Quick Start Guide - Page 3
    series Office All-In-One Quick Start Guide
  • Canon PIXMA MX7600 | Quick Start Guide - Page 4
    copied in any form whatsoever without the express written permission. Disclaimer Canon U.S.A., Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use guide to your Canon PIXMA MX7600 series Office All-In-One. All statements, technical information and recommendations in this
  • Canon PIXMA MX7600 | Quick Start Guide - Page 5
    118 Performing Ink Quality Maintenance Manually 122 Cleaning Your Machine 123 Troubleshooting 131 An Error Message Is Displayed on the LCD 133 LCD Cannot Be Seen At All or Display is Difficult to See 139 An Unintended Language Is Displayed on the LCD 139 Cannot Install the MP Drivers 140
  • Canon PIXMA MX7600 | Quick Start Guide - Page 6
    Introduction This Quick Start Guide uses the following symbols to indicate important information. Always observe the instructions indicated by these symbols. Warning Instructions that, if ignored, could result in death or serious personal injury caused by incorrect operation of the equipment. These
  • Canon PIXMA MX7600 | Quick Start Guide - Page 7
    not attempt to use the machine in any way not described in this manual. Warning z This product emits low level magnetic flux. If you use around the machine, immediately unplug the machine at the power supply and call for service. Periodically, unplug the machine and use a dry cloth to wipe off any
  • Canon PIXMA MX7600 | Quick Start Guide - Page 8
    cleaning it, you could injure yourself or damage the machine. Do not attempt to disassemble or modify the machine. There are no user serviceable °F) and humidity of 10% to 90% (condensation free). Do not place back attached to the wall. Ensure that the area around the power outlet is kept clear
  • Canon PIXMA MX7600 | Quick Start Guide - Page 9
    on the Document Cover. The Platen Glass may break and cause injury. Keep ink tanks out of the reach of children. The Clear Ink contains nitrates. In case ink is accidentally licked or swallowed, rinse out mouth or give one or two glasses of water to drink. If irritation or discomfort occurs, obtain
  • Canon PIXMA MX7600 | Quick Start Guide - Page 10
    your Canon service representative. z Machine z Setup CD-ROM z Easy Setup Instructions (Setup Sheet) z Network Setup Guide z Quick Start Guide z Print Head z Ink tanks (PGI-9PBK, PGI-7BK, PGI-9Y, PGI-9M, PGI-9C) z Clear ink tank (PGI-9Clear) The clear ink is used only when printing on plain paper
  • Canon PIXMA MX7600 | Quick Start Guide - Page 11
    , refer to the Scanning Guide on-screen manual. (5) MEMORY CARD button error, such as paper-out or ink-out, occurs. (8) LCD (Liquid Crystal Display) Displays messages, menu selections, and the operational status. (9) Menu button Displays the menu screen. (10) Settings button Configures the page
  • Canon PIXMA MX7600 | Quick Start Guide - Page 12
    or setting item. This button is also used to dismiss the error message and resume the machine's normal operation after resolving a printing error or removing jammed paper, or to eject documents remaining in the ADF. (21) Back button Cancels operations and returns the LCD to the previous screen. (22
  • Canon PIXMA MX7600 | Quick Start Guide - Page 13
    button (7) Settings button (8) { } [ ] buttons (9) OK button (10) Back button „ Basic Operation on the Menu Screen You can perform various printing on page 113 or "Cleaning Your Machine" on page 123. For details on the device settings, refer to "Device Settings" in the User's Guide on-screen manual.
  • Canon PIXMA MX7600 | Quick Start Guide - Page 14
    Print specified document Delete specified doc. Print reports/lists (page 99) Activity report Telephone number list User's data list Memory list TEL number registration (page 68) One-touch speed dial Coded speed dial Group dial Maintenance/settings (page 11) * This setting is only available in US and
  • Canon PIXMA MX7600 | Quick Start Guide - Page 15
    114) Cleaning (page 116) Deep cleaning (page 117) Ink quality maintenance (page 122) Sheet cleaning (page 128) Auto head align (page 118) Manual head align (page 119) Head alignment print (page 118) Roller cleaning (page 125) Bottom plate cleaning (page 126) Device settings screen FAX settings* User
  • Canon PIXMA MX7600 | Quick Start Guide - Page 16
    from a PictBridge compliant device. Note When printing from a computer, see "Printing from Your Computer" on page 44. This section describes the procedure to change the settings, taking the steps to specify the page size for the memory card mode to 4" x 6" (101 x 152) as an example. 1 Display the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 17
    returns to the previous screen. Note For details on the setting Items z For the settings in the copy mode, see "Setting Items" on page 33. z For the settings in the memory card mode, see "Setting Items" on page 41. z For the settings in the fax mode, see "Changing the Print Settings" on
  • Canon PIXMA MX7600 | Quick Start Guide - Page 18
    machine before printing. „ Turning on the Machine Note If preparatory operations below are not complete, follow your setup sheet and/or the Network Setup Guide to complete them. z The Print Head and ink tanks are set into place. If you are using the machine connected to a computer, confirm also the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 19
    z Screen-saver Mode The LCD goes out if the machine is not operated for about five minutes*. * You cannot change the wait time before the LCD goes out. Note When you want to restore the display, perform any operation such as copying, faxing, or scanning, or press any button except for the ON/OFF
  • Canon PIXMA MX7600 | Quick Start Guide - Page 20
    x 5.8 inches / 148 x 148 mm 1 sheet Only A4 or Letter-sized documents for duplex copying jam. - Wrinkled or creased paper - Curled paper - Torn paper - Paper with holes - Glued paper - Carbon paper or carbon-backed paper - Surface treated paper - Onion skin or thin paper - Photograph or thick paper
  • Canon PIXMA MX7600 | Quick Start Guide - Page 21
    Note z The machine cannot scan the shaded area (A) in the figure on the right. (A) 0.04 inches / 1 mm z For details about making copies, see "Copying" on page 32. z For details about scanning images, see "Scanning Images" on page 46. z For details about sending faxes, see "Sending Faxes" on
  • Canon PIXMA MX7600 | Quick Start Guide - Page 22
    apart from each other. (C) 0.4 inches / 10 mm (C) (C) (C) Note z If photographs are placed closer, they may be scanned as a single image. For details, refer to the Scanning Guide on-screen manual. z For details about scanning images, see "Scanning Images" on page 46. 3 Gently close the Document
  • Canon PIXMA MX7600 | Quick Start Guide - Page 23
    original document with the side to be copied, scanned, or faxed facing up in the ADF. 4 Adjust the Document Guides to match the document width. Note Ensure that the edge of the document stack is in line with the Paper Size Mark (A) imprinted on the Document Tray. (A) Before Using the Machine 19
  • Canon PIXMA MX7600 | Quick Start Guide - Page 24
    the machine. „ Using Specialty Media Canon recommends that you use Canon genuine media to ensure optimal print quality. z Photo Quality Media z Matte Photo Paper z Photo Paper Plus Glossy z Photo Paper Plus Glossy II z Photo Paper Plus Semi-gloss z Fine Art Paper "Photo Rag™" z Media Suited for
  • Canon PIXMA MX7600 | Quick Start Guide - Page 25
    Rear Tray Cassette Not loadable*8 10 envelopes Not loadable*8 Approx. 150 sheets Not loadable*6 100 sheets Paper Output Tray Load Limit Approx. 50 sheets *4 50 sheets Media Type Machine Setting Plain paper - Plain paper Printer Driver Setting Plain Paper Envelope Plain Paper MP-101 A4, Letter
  • Canon PIXMA MX7600 | Quick Start Guide - Page 26
    refer to "Before Printing on Art Paper" in "Printing Media" of the User's Guide on-screen manual. If you are using this paper, you cannot print in the 1.38 inches / 35 mm margin on the top and bottom edges. If you choose a special page size for Fine Art Paper in the printer driver, a limit is set to
  • Canon PIXMA MX7600 | Quick Start Guide - Page 27
    media type other than plain paper is selected for printing, paper is automatically fed from the Rear Tray. Note For details on loading paper, see "Loading Paper in the Rear Tray" on page 25. (A) (A) Rear Tray: Load photo paper, or any type of paper other than plain paper Before Using the Machine
  • Canon PIXMA MX7600 | Quick Start Guide - Page 28
    in the Cassette. When plain paper is selected for printing, paper is automatically fed from the Cassette. Only A4, B5, A5, Letter, or Legal-sized paper can be loaded in the Cassette. Note z For details on loading paper, see "Loading Paper in the Cassette" on page 27. z Load A4, Letter, Legal-sized
  • Canon PIXMA MX7600 | Quick Start Guide - Page 29
    (B) can cause the paper to be jammed. (A) (B) Note z We recommend using genuine Canon photo media when printing photographs. For details on the specialty media Canon provides for use with its various printers, see "Using Specialty Media" on page 20. When Printing on Plain Paper z You can use
  • Canon PIXMA MX7600 | Quick Start Guide - Page 30
    the machine connected to a computer, select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver. For details on printer driver settings, see "Printing with Windows" on page 44 or "Printing with Macintosh" on page 45. 26 Before Using the Machine
  • Canon PIXMA MX7600 | Quick Start Guide - Page 31
    page 25. 2 Pull out the Cassette from the machine. 3 Load the paper with the print side facing DOWN. (1) Load the paper in the Cassette with the print side facing DOWN and the leading edge to the far side. (2) Align the paper stack against the right side of the Cassette. (3) Slide the Paper Guides
  • Canon PIXMA MX7600 | Quick Start Guide - Page 32
    the machine connected to a computer, select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver. For details on printer driver settings, see "Printing with Windows" on page 44 or "Printing with Macintosh" on page 45. 28 Before Using the Machine
  • Canon PIXMA MX7600 | Quick Start Guide - Page 33
    either European DL or US Comm. Env. #10-sized envelope. With proper printer driver settings, the address will be printed according show a side view of the leading edge of the envelope. Important The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make sure
  • Canon PIXMA MX7600 | Quick Start Guide - Page 34
    Rear Tray. (2) Select the size for envelopes. In Windows®, select DL Env. or Comm. Env. #10 in Page Size. In Macintosh®, select DL Envelope or #10 Envelope in Paper Size. (3) Select Landscape in Orientation. Important Be sure to set the printer driver setting properly. If you do not, the address
  • Canon PIXMA MX7600 | Quick Start Guide - Page 35
    the machine connected to a computer, select the size and type of the loaded paper in Page Size (or Paper Size) and Media Type in the printer driver. For details on printer driver settings, see "Printing with Windows" on page 44 or "Printing with Macintosh" on page 45. Before Using the Machine 31
  • Canon PIXMA MX7600 | Quick Start Guide - Page 36
    Copies This section describes the basic procedure to make copies. For details, refer to "Copying" in the User's Guide on-screen manual. 1 Turn on the machine. See "Turning the Machine On and Off" on page 14. 2 Press the COPY button to select the copy mode if another mode has been selected. 3 Load
  • Canon PIXMA MX7600 | Quick Start Guide - Page 37
    . Grayscale renders tones in a range of grays instead of black or white. (4) Magnification Specify the reduction/enlargement method. For details, refer to "Reducing or Enlarging a Copy" in "Making Copies" of the User's Guide on-screen manual. z Tab 2 You can specify whether to enable the automatic
  • Canon PIXMA MX7600 | Quick Start Guide - Page 38
    (5) Auto intensity Specify whether the intensity is adjusted automatically when copying originals loaded on the Platen Glass. When Auto intensity ON is selected, Auto will be displayed in the intensity slide bar on the copy screen. Important You can change the intensity by pressing the [ or ] button
  • Canon PIXMA MX7600 | Quick Start Guide - Page 39
    Functions For details, refer to "Using Useful Copy Functions" in the User's Guide on-screen manual. Reducing or Enlarging a Copy Copying onto Both Sides of the Paper (Two-sided copy) Copying Two Pages to Fit onto a Single Page (2-on-1 copy) Copying without Borders (Borderless copy) Copying Four
  • Canon PIXMA MX7600 | Quick Start Guide - Page 40
    memory card z SDHC memory card z MultiMediaCard z Compact Flash (CF) Card Supports Type I/II (3.3 V) z Microdrive z Memory Stick z Memory Stick PRO that can be inserted in the Card Slot using the adapter: Important If one of the following memory cards is inserted without an adapter, you may not
  • Canon PIXMA MX7600 | Quick Start Guide - Page 41
    Printable Image Data This machine supports JPEG and TIFF images created by DCF ver. 1.0/2.0 standard compliant on the machine. See "Turning the Machine On and Off" on page 14. 2 Attach a card adapter if your memory card requires one. 3 Open the Card Slot Cover. (A) Printing from a Memory Card 37
  • Canon PIXMA MX7600 | Quick Start Guide - Page 42
    4 Insert only one memory card into the Card Slot. z How to insert Insert a memory card with the labeled side facing to the right. Card Type z Compact Flash (CF)
  • Canon PIXMA MX7600 | Quick Start Guide - Page 43
    machine. See "Turning the Machine On and Off" on page 14. (2) Load paper. See "Loading Printing Paper" on page 20. 2 Insert the memory card. (1) Press the press the OK button. Full-screen view: Shows one photo at full-screen. Enlarged view: Shows one photo magnified four times. Move the area to
  • Canon PIXMA MX7600 | Quick Start Guide - Page 44
    button. See "Setting (2) Items" on page 41. (3) Press the Color button. Using Useful Printing Functions For details, refer to "Printing Photographs Saved on a Memory Card" and "Using Useful Printing Functions" in the User's Guide on-screen manual. Multiselect print Prints selected photos
  • Canon PIXMA MX7600 | Quick Start Guide - Page 45
    z Tab 1 You can specify the settings of the printing paper, bordered/borderless print, date/file no., etc. (1) (2) (3) (4) (5) (1) Page size Select the page size of the loaded paper. (2) Media type Select the media type of the loaded paper. (3) Print quality Adjust the print quality according to the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 46
    the functions below. (6) (11) (7) (12) (8) (13) (9) (14) (10) (15) (16) (6) Auto image fix When Auto image fix ON is selected brightness and tone of a photo. (10) Noise reduction Reduces the noise on blue areas like the sky as well as on black areas. (11) Face brightener Brightens a
  • Canon PIXMA MX7600 | Quick Start Guide - Page 47
    be printed. 8 Fill in the appropriate circles in the Photo Index Sheet. 9 Load the type of paper you selected in the Photo Index Sheet. 10 Use the [ or ] button to select Scan sheet and print, then press the OK button. 11 Place the Photo Index Sheet face-down on the Platen Glass, then press the OK
  • Canon PIXMA MX7600 | Quick Start Guide - Page 48
    is selected, a message indicating that paper will be fed from the Rear Tray will be displayed. Click OK. Note For details on the printer driver functions, click Help or Instructions to view the online help or the PC Printing Guide on-screen manual. Instructions is only displayed when the on-screen
  • Canon PIXMA MX7600 | Quick Start Guide - Page 49
    is selected, the paper source will switch to the Rear Tray. Note For details on the printer driver functions, click to view the PC Printing Guide on-screen manual. If the on-screen manuals are not installed, the PC Printing Guide on-screen manual is not displayed even if is clicked. 10 Click Print
  • Canon PIXMA MX7600 | Quick Start Guide - Page 50
    data can be sent to one of the computers connected over the Machine" on page 47. z If You Guide on-screen manual. Besides the above-mentioned methods, you can use a TWAIN- or WIA- (Windows Vista and Windows XP only) compliant application software and the Control Panel (Windows Vista and Windows
  • Canon PIXMA MX7600 | Quick Start Guide - Page 51
    v.10.4.x. For details, refer to "Scanning Methods" in the User's Guide on-screen manual. 2 Turn on the machine. See "Turning the Machine On and Off" on page the User's Guide on-screen manual. 7 Use the { or } button to select the scan operation, then press the OK button. 8 Press the Color or Black
  • Canon PIXMA MX7600 | Quick Start Guide - Page 52
    compliant device and machine, follow the instructions given in the device's instruction manual. Note When printing photos with the PictBridge Machine On and Off" on page 14. (2) Load paper. See "Loading Printing Paper" on page 20. 48 Printing Photographs Directly from a PictBridge Compliant
  • Canon PIXMA MX7600 | Quick Start Guide - Page 53
    connecting it to this machine according to instructions given in the device's instruction manual. (1) Make sure that the PictBridge connected. 3 Specify the print settings such as paper type and layout. See "About PictBridge Print Settings" on page 50. You can make settings using the menu
  • Canon PIXMA MX7600 | Quick Start Guide - Page 54
    be sure to follow the instructions given in the instruction manual of your PictBridge compliant device Canon genuine papers depending on the country or region of purchase. *6 When printing on 8" x 10" / 203.2 x 254.0 mm (SG-201) paper, select 8" x 10" / 20 x 25 cm for Paper size and Default for Paper
  • Canon PIXMA MX7600 | Quick Start Guide - Page 55
    info (Exif Data) in list format on a single sheet of paper. z 35 mm Film Style Layout (Contact Printing Layout)*1, Canon-brand PictBridge compliant devices. *2 You can use this option only when 4" x 6" / 10 x 15 cm, 5" x 7", 8" x 10" / 20 x 25 cm, A4, or 8.5" x 11" (Letter) is selected for Paper
  • Canon PIXMA MX7600 | Quick Start Guide - Page 56
    . (7) Use the { or } button to select the item to set. (8) Use the [ or ] button to change the setting. (9) Repeat steps (6) to (8) to specify the setting. (10) After finishing all settings you need, press the OK button. 52 Printing Photographs Directly from a PictBridge Compliant Device
  • Canon PIXMA MX7600 | Quick Start Guide - Page 57
    Page size Select the page size, when printing directly from a PictBridge compliant device. Paper size (2) Media type Select the media type, when printing Paper noise on blue areas like the sky as well as on black areas. (10) Face brightener Brightens a darkened face on the photo taken against
  • Canon PIXMA MX7600 | Quick Start Guide - Page 58
    accidentally unplug the power cord, all documents stored in memory will be lost. User data and speed dialing settings are retained. If the power disconnects, the following Machine to an Analog Line z Connecting the Machine without Telephone or Answering Machine (A) (A) Telephone line (analog) z
  • Canon PIXMA MX7600 | Quick Start Guide - Page 59
    machine and external devices in parallel to the same telephone line using a distribution adapter (B). The machine may not operate properly connecting a telephone or answering machine, remove the Telephone connector cap. For Users in the UK If the connector of the external device cannot be connected
  • Canon PIXMA MX7600 | Quick Start Guide - Page 60
    are examples and could not be guaranteed to suit every connecting condition. For details, refer to the instruction manual supplied with the network device (control devices such as an xDSL (Digital Subscriber Line) modem or terminal adapter) you are connecting to this machine. z Connecting to an xDSL
  • Canon PIXMA MX7600 | Quick Start Guide - Page 61
    or service provider to confirm your line type. Note z Rotary pulse is not supported depending on the country of purchase. The Telephone line type menu will not be displayed in such country. z You can print the User's data list to check the current setting. See "Printing the User's Data List" on page
  • Canon PIXMA MX7600 | Quick Start Guide - Page 62
    (2) Use the { or } button to select User settings, then press the OK button. The User settings screen is displayed. 4 Display the Telephone line type screen. (1) Use the { or } button to select Telephone line type, then press the OK button. The Telephone line type screen is displayed. 5 Select the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 63
    sent from your machine: 04/10/2008 15:33 FAX 123 one-touch or coded speed dial. (E) Page number Note z When sending a fax in black & white, you can set the sender information to print inside or outside the image area. Refer to "TTI position" in "Device Settings" of the User's Guide on-screen manual
  • Canon PIXMA MX7600 | Quick Start Guide - Page 64
    name, Name, or Group name. Example: uppercase letter mode Note Here describes the one-touch speed dial registration. To display the One-touch speed dial screen, see "Registering One-Touch Speed Dial" on page 68. 2 Use the Numeric buttons to enter a character. Press the button repeatedly until
  • Canon PIXMA MX7600 | Quick Start Guide - Page 65
    /MM/YYYY. For details on the date format settings, refer to "Date display" in "Device Settings" of the User's Guide on-screen manual. z When the machine is connected to a computer with the MP Drivers installed, the date and time setting will be copied from the computer to the machine. As long as the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 66
    Press the OK button to finalize your setting. The display returns to the User settings screen. „ Setting Daylight Saving Time (Summer Time) Some countries adopt saving time (summer time) system that shifts the clock time forward or back at certain periods of the year. You can set your machine to
  • Canon PIXMA MX7600 | Quick Start Guide - Page 67
    4 Display the Summer time setting screen. (1) Use the { or } button to select Summer time setting, then press the OK button. The Summer time setting screen is displayed. 5 Enable summer time. (1) Use the { or } button to select ON to enable summer time, then press the OK button. To disable summer
  • Canon PIXMA MX7600 | Quick Start Guide - Page 68
    (3) Use the { or } button to select the week when summer time starts, then press the OK button. (4) Use the { or } button to select the day of the week when summer time starts, then press the OK button. (5) Use the Numeric buttons to enter the time (in 24-hour format) when summer time starts, then
  • Canon PIXMA MX7600 | Quick Start Guide - Page 69
    (2) Use the { or } button to select the month when summer time ends, then press the OK button. (3) Use the { or } button to select the week when summer time ends, then press the OK button. (4) Use the { or } button to select the day of the week when summer time ends, then press the OK button. (5)
  • Canon PIXMA MX7600 | Quick Start Guide - Page 70
    is displayed. (2) Use the [ or ] button to select Device settings, then press the OK button. The Device settings screen is displayed. 3 Display the User settings screen. (1) Use the { or } button to select FAX settings, then press the OK button. The FAX settings screen is displayed. (2) Use the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 71
    or delete numbers, see "Guidelines for Entering Numbers, Letters, and Symbols" on page 60. z You can print the User's data list to confirm the sender information you have registered. See "Printing the User's Data List" on page 100. 7 Press the OK button to finalize your setting. The display returns
  • Canon PIXMA MX7600 | Quick Start Guide - Page 72
    99) destinations. z Group Dial Register two or more registered one-touch or coded speed dial numbers for group dial. You can send the same document to all members in that group. „ Registering One-Touch Speed Dial Before you can use one-touch speed dial, you need to register the recipients' numbers
  • Canon PIXMA MX7600 | Quick Start Guide - Page 73
    a button by pressing the One-Touch Speed Dial button (01 to 08). (2) Use the Numeric buttons to enter a name for the one-touch speed dial (max. characters or numbers, see "Guidelines for Entering Numbers, Letters, and Symbols" on page 60. z Press the Redial/Pause button to enter a pause. z Press
  • Canon PIXMA MX7600 | Quick Start Guide - Page 74
    the Numeric buttons (A) or the {, }, [, or ] button (B) to select an unoccupied speed dial code (00 to 99), then press the OK button. (A) (B) (2) Use the Numeric buttons to enter a name for the coded speed dial code (max. 16 characters, including spaces), then press the OK or } button. 70 Faxing
  • Canon PIXMA MX7600 | Quick Start Guide - Page 75
    dial list. See "Printing a List of the Registered Destinations" on page 75. „ Registering Group Dial To send the same document to several recipients, select numbers you registered to one-touch speed dial or coded speed dial and register them to a group dial. 1 Display the FAX menu screen. (1) Press
  • Canon PIXMA MX7600 | Quick Start Guide - Page 76
    . Note You can register a group either under an unoccupied one-touch speed dial or coded speed dial code. 4 Select a one-touch speed dial or coded speed dial code under which you want to register the group. z To register a group under a one-touch speed dial: (1) Use the { or } button to select
  • Canon PIXMA MX7600 | Quick Start Guide - Page 77
    the group, repeat this step. z You can only enter numbers that have already been registered for one-touch or coded speed dial (i.e. you cannot enter the fax/telephone numbers with the Numeric buttons). z To review the numbers you have entered, use the { or } button. z To delete the numbers you have
  • Canon PIXMA MX7600 | Quick Start Guide - Page 78
    Note If Group dial is selected, the screen to select One-touch or Coded speed dial is displayed. See "Registering Group Dial" on page 71. 4 Select a number to change. z To change a one-touch speed dial: Use the { or } button to select a one-touch speed dial (01 to 08) to change, then press the OK
  • Canon PIXMA MX7600 | Quick Start Guide - Page 79
    coded speed dial code to delete, then press the OK button. z To delete a group dial registered to the one-touch speed dial: Use the { or } button to select the one your machine to refer to it when dialing. 1 Load paper. See "Loading Printing Paper" on page 20. 2 Display the FAX menu screen. (1) Press
  • Canon PIXMA MX7600 | Quick Start Guide - Page 80
    { or } button to select Telephone number list, then press the OK button. The Telephone number list screen is displayed. (2) Use the { or } button to select One-touch speed dial, Coded speed dial, or Group dial, then press the OK button. 5 Print the speed dial list. z If you selected
  • Canon PIXMA MX7600 | Quick Start Guide - Page 81
    PBX or other telephone switching systems, you have to dial the outside line access number first, and then the number of the party you are calling or Black button. If you have only one page of original, go to step (3). (2) Load the next page on the Platen Glass and press the Color or Black button.
  • Canon PIXMA MX7600 | Quick Start Guide - Page 82
    documents. Suitable for photographs. 4 Press the OK button. z Adjusting the Density (Scan contrast) Contrast is the degree of difference between light and dark. Increasing the scan contrast thickens the whole fax image, or light penciled texts and such can be thickened. 1 Press the FAX button
  • Canon PIXMA MX7600 | Quick Start Guide - Page 83
    the Black button for black & white sending. Important Color sending requires that the recipient's fax machine supports color faxing. z When the document was loaded on the Platen Glass: (1) When the following message is displayed, load the next page on the Platen Glass. If you have only one page of
  • Canon PIXMA MX7600 | Quick Start Guide - Page 84
    , press the Stop/Reset button. To cancel sending a fax while it is being sent, press the Stop/Reset button, then follow the instructions on the LCD. Note You can also dial using the one-touch speed dial or coded speed dial. See "Sending a Fax using the Speed Dial" on page 82. 3 Lift the handset of
  • Canon PIXMA MX7600 | Quick Start Guide - Page 85
    is available only when the recipient's fax machine supports color faxing. 6 Hang up the handset. Note z To cancel sending a fax, press the Stop/Reset button. To cancel sending a fax while it is being sent, press the Stop/Reset button, then follow the instructions on the LCD. z If documents remain in
  • Canon PIXMA MX7600 | Quick Start Guide - Page 86
    the Numeric Buttons" on page 79. Important Color sending requires that the recipient's fax machine supports color faxing. Note z To cancel sending a fax, press the Stop/Reset button. To cancel sending a fax while it is being sent, press the Stop/Reset button, then follow the instructions on the LCD
  • Canon PIXMA MX7600 | Quick Start Guide - Page 87
    " on page 79. Important Color sending is available only when the recipient's fax machine supports color faxing. Note z To cancel sequential broadcasting, press the Stop/Reset button. To cancel sending a fax while it is being sent, press the Stop/Reset button, then follow the instructions on the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 88
    redial" in "Device Settings" of the User's Guide on-screen manual. Note z The range of values you Reset button. z To cancel automatic redialing, delete the unsent document from the machine's memory when redialing is standing by. For details, see "Deleting a Document in Memory" on page 97. z Manual
  • Canon PIXMA MX7600 | Quick Start Guide - Page 89
    switch to tone dialing if your machine is connected to a rotary pulse line. Important To use information services, you need to contract with the service providers. For details, contact the service providers. z Using the Touch Tone Line z Using the Hook Button 1 Press the FAX button. 2 Press the Hook
  • Canon PIXMA MX7600 | Quick Start Guide - Page 90
    finish using the service. „ Sending from Your Computer (Windows only) If your machine is connected to a computer, you can send faxes using the fax driver from any application software that has a printing function. For details, refer to the FAX Driver Guide onscreen manual. „ Sending/Receiving Using
  • Canon PIXMA MX7600 | Quick Start Guide - Page 91
    the paper settings and adjust them as needed. See "Changing the Print Settings" on page 93. Important z The machine cannot receive faxes when the power is turned off. Press the ON/OFF button to turn the power on. z To cancel receiving, press the Stop/Reset button and follow any instructions on
  • Canon PIXMA MX7600 | Quick Start Guide - Page 92
    settings. Refer to "FAX priority mode" in "Device Settings" of the User's Guide on-screen manual. - The time the machine takes to determine whether a call is Receive Only Faxes Automatically with Your Machine, or Have a Dedicated Telephone Line for Fax Use Only: Select FAX only mode. (A) (B) (A)
  • Canon PIXMA MX7600 | Quick Start Guide - Page 93
    the fax tone, press the FAX button, then press the Color or Black button to receive the fax. Note z If you pick up the handset, the "Remote Receiving" on page 94. The remote reception can be disabled. Refer to "Remote RX" in "Device Settings" of the User's Guide on-screen manual. (D) When the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 94
    For details, see "Setting the DRPD Ring Pattern (US and Canada only)" on page 92. z If You Want the Machine to Automatically Switch between Fax and Voice the fax ring pattern. Note z The name of this service varies depending on the country or region of purchase. z To use this feature,
  • Canon PIXMA MX7600 | Quick Start Guide - Page 95
    . The Receive mode settings screen is displayed. 3 Select a receive mode. (1) Use the { or } button to select a receive mode, then press the OK button. (2) Press the Back button to exit the FAX menu screen. The selected receive mode (A) will be displayed on the LCD. (A) Faxing 91
  • Canon PIXMA MX7600 | Quick Start Guide - Page 96
    single telephone line, allowing you to have different numbers for fax calls and voice calls using only one telephone line. Your machine telephone company. Note Contact your local telephone company for detailed information on this service. 1 Display the FAX menu screen. (1) Press the FAX button, then
  • Canon PIXMA MX7600 | Quick Start Guide - Page 97
    paper in the specified paper source and press the OK button. You can also press the Stop/Reset button to close the message and print the stored documents in memory later. See "Printing a Document in Memory" on page "Incoming ring" in "Device Settings" of the User's Guide on-screen manual. Faxing 93
  • Canon PIXMA MX7600 | Quick Start Guide - Page 98
    " in "Device Settings" of the User's Guide on-screen manual. z If the clear ink has run out, until the clear ink tank is replaced, the machine will not be able to print the received fax and will store it in its memory. The fax stored in memory needs to be printed manually. z Paper has run out while
  • Canon PIXMA MX7600 | Quick Start Guide - Page 99
    Ink has run out while receiving a fax. z Paper has run out while receiving a fax. z Paper other than A4, Letter, or Legal-sized paper is loaded. z OFF is selected for Auto print received. z You pressed the Stop/Reset memory. If an error occurred when sending paper. See "Loading Printing Paper" on page
  • Canon PIXMA MX7600 | Quick Start Guide - Page 100
    indicates a document being sent. z A transaction number from 5001 to 9999 indicates a document being received. (3) Use the { or } button to select Yes to print the first page only, or No to print all pages of the document, then press the OK button. 96 Faxing
  • Canon PIXMA MX7600 | Quick Start Guide - Page 101
    (4) Press the Back button or the Stop/Reset button to close the screen. To print other documents, repeat the procedure 3, you can also select Print reports/lists (see "Summary of Reports and Lists" on page 99) and then Memory list to print the memory list. z If you have canceled receiving a fax
  • Canon PIXMA MX7600 | Quick Start Guide - Page 102
    the document you want to delete, then press the OK button. 5 Use the { or } button to select Yes, then press the OK button. 6 Press the Back button or the Stop/Reset button to close the screen. To delete other documents, repeat the procedure from steps 4 to 5. 98 Faxing
  • Canon PIXMA MX7600 | Quick Start Guide - Page 103
    the pages indicated for more details. Report Or List Activity report One-touch speed dial list Coded speed dial list Group dial list User's data Settings" of the User's Guide on-screen manual. z Printing the Activity Report Manually 1 Load paper. See "Loading Printing Paper" on page 20. 2 Display
  • Canon PIXMA MX7600 | Quick Start Guide - Page 104
    settings of your machine as well as the registered sender information. See "Registering Sender Information" on page 59. z Printing the User's Data List 1 Load paper. See "Loading Printing Paper" on page 20. 2 Display the FAX menu screen. (1) Press the FAX button, then press the Menu button. The
  • Canon PIXMA MX7600 | Quick Start Guide - Page 105
    , refer to "TX report" in "Device Settings" of the User's Guide on-screen manual. z For the errors when you send a fax, see "Errors when you send a fax" on page 101. Errors when you send a fax If an error occurs when you send a fax, the error number is printed in the TX report (There are some
  • Canon PIXMA MX7600 | Quick Start Guide - Page 106
    refer to "RX report" in "Device Settings" of the User's Guide on-screen manual. z For the errors when you receive a fax, see "Errors when you receive a fax" on page 102. Errors when you receive a fax If an error occurs when you receive a fax, the error number is printed in the RX report. The causes
  • Canon PIXMA MX7600 | Quick Start Guide - Page 107
    For information on the compatible ink tanks, see the back cover of this guide. z If printing becomes faint or white streaks appear despite sufficient ink levels, see "When Printing Becomes Faint or Colors Are Incorrect" on page 113. „ Getting the Color or Black Ink Status Information You can confirm
  • Canon PIXMA MX7600 | Quick Start Guide - Page 108
    the function for detecting the remaining ink level is disabled, replace the ink tank with a new one. See "Replacing Ink Tanks" on page 106. If the lamps are still off after reinserting the ink tanks, there has been an error and the machine cannot print. Check the error message displayed on the LCD
  • Canon PIXMA MX7600 | Quick Start Guide - Page 109
    loaded in the Rear Tray, even if clear ink has run out. The following error message will be displayed on the LCD when the clear ink has run out during printing on plain paper. Refer to "When Replacing the Clear Ink Tank" on page 109 and replace the clear ink tank. If you continue printing under the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 110
    is also consumed in Print Head Cleaning and Print Head Deep Cleaning, which may be necessary to maintain the machine's performance. When an ink tank is out of ink, replace it immediately with a new one. 1 Open the Scanning Unit (Printer Cover) and the Paper Output Tray. (1) Make sure the machine is
  • Canon PIXMA MX7600 | Quick Start Guide - Page 111
    consumables. Note z Do not remove more than one ink tank at a time. Be sure to replace ink tanks one by one when replacing more than one ink tank. z For details on ink lamp flashing speed, see "Getting the Color or Black Ink Status Information" on page 103. 3 Prepare the replacement tank. (1) Remove
  • Canon PIXMA MX7600 | Quick Start Guide - Page 112
    not hold the LCD. Note z If the error message is still displayed after the Scanning Unit (Printer Cover) is closed, see "An Error Message Is Displayed on the LCD" on page 133. z When you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any
  • Canon PIXMA MX7600 | Quick Start Guide - Page 113
    out, and the machine may not operate properly when it is reinstalled. To maintain optimal printing quality, use a clear ink tank within six months of first use. 1 Open the Scanning Unit (Printer Cover) and the Paper Output Tray. (1) Make sure the machine is turned on. Important When replacing the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 114
    the replacement tank. Remove the orange tape in the direction of the arrow to peel off the protective film from the clear ink tank. Important z Do not shake ink tanks as this may cause the ink to leak out and stain your hands or the surrounding area. z Do not squeeze the side of the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 115
    the round, indented portion on the Clear Ink Tank Locking Cover until it snaps firmly into place, locking the ink tank. (B) (B) Be sure that the sharp corner of the ink tank is closest to you and on your left. (2) 5 Gently close the Scanning Unit (Printer Cover). Printing cannot be done until
  • Canon PIXMA MX7600 | Quick Start Guide - Page 116
    turned on. If automatic ink quality maintenance is disabled, the inks may separate, resulting in uneven densities. Be sure to follow "Performing Ink Quality Maintenance Manually" on page 122 before printing. For details, refer to "Device Settings" of the User's Guide on-screen manual. 112 Routine
  • Canon PIXMA MX7600 | Quick Start Guide - Page 117
    Quality setting in the printer driver settings. For details, refer to the PC Printing Guide on-screen manual. Step 1 See "Printing the Nozzle Check Pattern" on page 114. If lines are missing or if white streaks appear Step 2 See "Print Head Cleaning" on page 116. If the problem is not resolved
  • Canon PIXMA MX7600 | Quick Start Guide - Page 118
    the ink ejects properly from the print head nozzles. 1 Make sure that the machine is turned on, and then load a sheet of A4 or Letter- sized plain paper in the Cassette. 2 Open the Paper Output the appropriate action. See "Examining the Nozzle Check Pattern" on page 115. 114 Routine Maintenance
  • Canon PIXMA MX7600 | Quick Start Guide - Page 119
    check pattern, and perform cleaning if necessary. Note If the ink level is low, the nozzle check pattern is not printed correctly. Replace the relevant ink tank. See "Replacing an Ink Tank" on page 103. 1 Check the nozzle check pattern you printed. (1) (2) (1) Check if lines in this pattern are
  • Canon PIXMA MX7600 | Quick Start Guide - Page 120
    . See "Print Head Cleaning" on page 116. Print Head Cleaning Clean the Print Head if lines are missing or if white streaks appear in the printed nozzle check pattern. Cleaning unclogs the nozzles and restores the print head condition. Note that cleaning the Print Head causes used ink to be absorbed
  • Canon PIXMA MX7600 | Quick Start Guide - Page 121
    Head causes used ink to be absorbed in the ink absorber. Print Head Deep Cleaning consumes more ink than standard Print Head Cleaning, so perform this procedure only when necessary. 1 Make sure that the machine is turned on, and then load a sheet of A4 or Letter- sized plain paper in the Cassette
  • Canon PIXMA MX7600 | Quick Start Guide - Page 122
    an Ink Tank" on page 103. (2) If the problem is not resolved, turn off the machine and perform another Print Head Deep Cleaning after 24 hours. (3) If this does not solve the problem, the Print Head may be damaged. Contact your Canon service representative. Aligning the Print Head If ruled lines are
  • Canon PIXMA MX7600 | Quick Start Guide - Page 123
    the procedure below to perform Manual Print Head Alignment. For details on performing Automatic Print Head Alignment, see "Automatic Print Head Alignment" on page 118. 1 Make sure that the machine is turned on, and then load two sheets of A4 or Letter- sized plain paper in the Cassette. 2 Open the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 124
    position. (1) Check the printed patterns, and use the [ or ] button to input the number of the pattern in column A that has the least noticeable vertical streaks. Note If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical white
  • Canon PIXMA MX7600 | Quick Start Guide - Page 125
    Check the printed patterns, and use the [ or ] button to input the number of the pattern in column L that has the least noticeable vertical streaks. (2) Repeat the same procedure until you finish inputting the pattern number for columns M to Q, then press the OK button. (3) Use the [ or ]button to
  • Canon PIXMA MX7600 | Quick Start Guide - Page 126
    follow the following instructions to manually stir the inks about once a week. Note Enabling the automatic ink quality maintenance function is recommended. For details on specifying the ink quality maintenance setting, refer to "Device Settings" of the User's Guide on-screen manual. 1 Press the Menu
  • Canon PIXMA MX7600 | Quick Start Guide - Page 127
    z Do not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or fine threads may remain inside the machine and cause problems such as a blocked Print side of the Document Cover (white sheet) (A) is easily damaged, so wipe it gently. Routine Maintenance 123
  • Canon PIXMA MX7600 | Quick Start Guide - Page 128
    Glass (B), the inner side of the Document Cover (white sheet) (A), the glass of the ADF (C), and the inner side of the ADF (white area) (D) gently. Make sure not to leave any residue, especially on the Platen Glass. (D) (A) (C) (B) „ Cleaning the ADF Caution z Be sure to turn off the power
  • Canon PIXMA MX7600 | Quick Start Guide - Page 129
    Extension. (1) Press the Open button to open the Paper Output Tray. (2) Open the Output Tray Extension. 5 Make sure that the paper feed roller stops rotating, then load three sheets of A4 or Letter-sized plain paper in portrait orientation in the paper source you cleaned. Routine Maintenance 125
  • Canon PIXMA MX7600 | Quick Start Guide - Page 130
    the like. Rotate the roller (A) manually as you clean it. Do not touch the roller with your fingers; rotate it with the cotton swab. (A) If the problem is still not resolved after performing the procedure above, contact your Canon service representative. „ Cleaning the Inside of the Machine (Bottom
  • Canon PIXMA MX7600 | Quick Start Guide - Page 131
    paper. If it is smudged with ink, perform Bottom Plate Cleaning again. If the problem is not resolved after performing Bottom Plate Cleaning twice, the protrusions inside the machine may be stained. Clean them according to instructions. See "Cleaning the Protrusions Inside the Machine" on page
  • Canon PIXMA MX7600 | Quick Start Guide - Page 132
    Installing and Using the Cleaning Sheets The machine comes with five cleaning sheets. These cleaning sheets can be stored in the Cleaning Sheet Holder on the back side of the Document Cover. Note When you have run out of cleaning sheets, contact your Canon service representative. 1 Open the Document
  • Canon PIXMA MX7600 | Quick Start Guide - Page 133
    the machine is turned on, and then remove any paper from the Rear Tray. 2 Prepare a cleaning sheet. Take out a cleaning sheet. For details on taking out cleaning sheets, see "Installing and Using the Cleaning Sheets" on page 128. 3 Open the Paper Output Tray, and then open the Output Tray Extension
  • Canon PIXMA MX7600 | Quick Start Guide - Page 134
    button. The sheet cleans the inside of the machine as it feeds through the machine. Important Discard used cleaning sheets as soon as sheet cleaning is done. Handle the sheets carefully to are stained, wipe off any ink from the protrusions using a cotton swab or the like. 130 Routine Maintenance
  • Canon PIXMA MX7600 | Quick Start Guide - Page 135
    the methods of machine operation for troubleshooting. To handle problems using your computer, refer to "Troubleshooting" in the User's Guide on-screen manual. For details on how to view the on-screen manuals, see "Reading the On-screen Manuals" on page 169. z "An Error Message Is Displayed on the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 136
    Occurs When the Machine Is Connected to a Computer When an error occurs in printing such as the machine is out of paper or paper is jammed, a troubleshooting message is displayed automatically. Take the appropriate action described in the message. The message may vary depending on the version of
  • Canon PIXMA MX7600 | Quick Start Guide - Page 137
    paper. See "Replacing an Ink Tank" on page 103. Follow the directions given in your setup sheet to install the Print Head. If the Print Head is already installed, remove the Print Head once and then reinstall it. If the error is not resolved, the Print Head may be damaged. Contact your Canon service
  • Canon PIXMA MX7600 | Quick Start Guide - Page 138
    paper until the clear ink tank is replaced with a new one. See "Replacing an Ink Tank" on page 103. Note Until the clear ink tank is replaced, the machine will not be able to print the received fax and will store it in its memory. The fax stored in memory needs to be printed manually. "The ink
  • Canon PIXMA MX7600 | Quick Start Guide - Page 139
    memorized. Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing or refilling of ink. See "Replacing an Ink Tank" on page 103. "Printer detected ink out condition. Stop printing, then replace the ink tank." (when printing is
  • Canon PIXMA MX7600 | Quick Start Guide - Page 140
    printing. Contact the service center." "Auto head align has failed. Press OK and repeat operation. " "The transport unit may not be clean. Perform sheet cleaning. " "**** Error code" "Scanner is not operating correctly." Action The machine has a built-in ink absorber to hold
  • Canon PIXMA MX7600 | Quick Start Guide - Page 141
    one side at a time. "This paper is not compatible with duplex printing. Remove the paper and press OK." The Page size or Paper size setting in the printer driver black & white. Refer to "Color TX" in "Device Settings" of the User's Guide on-screen manual. "Failed to connect." The telephone line
  • Canon PIXMA MX7600 | Quick Start Guide - Page 142
    User's Guide on-screen manual. If the clear ink has run out, until the clear ink tank is replaced, the machine will not be able to print the received fax and will store it in its memory. The fax stored in memory needs to be printed manually. See "Printing a Document in Memory" on page 95. z Paper
  • Canon PIXMA MX7600 | Quick Start Guide - Page 143
    machine will power on and the LCD will display a message. z If one of the mode buttons (e.g., the COPY button) is lit The LCD may be on page 15. Adjust the LCD contrast setting. For details, refer to "Adjust contrast" in "Device Settings" of the User's Guide on-screen manual. Troubleshooting 139
  • Canon PIXMA MX7600 | Quick Start Guide - Page 144
    computer. (7)Make sure you have no application software running. (8)Follow the procedure described in your setup sheet or the Network Setup Guide to reinstall the MP Drivers. (1)Click Start then Computer. In Windows XP, click Start then My Computer. In Windows 2000, double-click the My Computer icon
  • Canon PIXMA MX7600 | Quick Start Guide - Page 145
    proper installation. If the MP Drivers were not installed correctly, uninstall the MP Drivers, restart your computer, and then reinstall the MP Drivers. Refer to the PC Printing Guide on-screen manual. Note If the installer was forced to be terminated due to a Windows error, the system may be in
  • Canon PIXMA MX7600 | Quick Start Guide - Page 146
    Guide on-screen manual. z Check 3: If the problem is not resolved, there may be other causes. See also the sections below. z "Printing Does Not Start/Printing Is Blurred/Colors Are Wrong/Straight Lines Are Misaligned" on page 143 z "White Streaks" on page 143 z "Printed Paper Curls or Has Ink
  • Canon PIXMA MX7600 | Quick Start Guide - Page 147
    absorb too much ink and become wavy, causing paper abrasion. When copying, see "Making Copies" on page 32 and reduce the intensity setting. Then try printing again. When printing from your computer, refer to "Print Results Not Satisfactory" in the User's Guide on-screen manual. Troubleshooting 143
  • Canon PIXMA MX7600 | Quick Start Guide - Page 148
    the printer driver Refer to "Print Results Not Satisfactory" in the User's Guide on-screen manual. If you are printing beyond the recommended printing area of your printing paper, the lower edge of the paper may become stained with ink. Resize your original document in your application software. For
  • Canon PIXMA MX7600 | Quick Start Guide - Page 149
    the problem, see "Manual Print Head Alignment" on page 119 and perform Manual Print Head Alignment. If automatic ink quality maintenance is disabled, ink in one or more ink tanks may separate, resulting in uneven density. Refer to "Auto ink qual maintenance" in "Device Settings" of the User's Guide
  • Canon PIXMA MX7600 | Quick Start Guide - Page 150
    Properties Dialog Box Directly from the Control Panel" in "Opening the Printer Properties Dialog Box (Windows)" of the User's Guide on-screen manual. (2)Click the Maintenance tab and then View Printer Status. The printer status monitor is displayed. (3)Click Display Print Queue. (4)Select Cancel All
  • Canon PIXMA MX7600 | Quick Start Guide - Page 151
    and eject blank paper. Check the following Printer Properties Dialog Box (Windows)" of the User's Guide on-screen manual. (2)Click Print Options in the Page Setup sheet. The Print Options dialog box is displayed. (3)Select Maximum for Unit of Print Data Processing and click OK. z If the problem
  • Canon PIXMA MX7600 | Quick Start Guide - Page 152
    necessary. For details on cleaning, see "Cleaning the Paper Feed Roller (Roller Cleaning)" on page 125. Paper not loaded properly. Make sure of the following when you load paper in the machine. z When loading two or more sheets of paper, align the edges of the sheets before loading. z Always load
  • Canon PIXMA MX7600 | Quick Start Guide - Page 153
    paper to print documents with photos or graphics, since the printout may curl and cause paper exit jams. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting
  • Canon PIXMA MX7600 | Quick Start Guide - Page 154
    . All print jobs in queue are canceled. Reprint if necessary. If you cannot remove the jammed paper or the paper jam error continues after removing the paper, contact your Canon service representative. Remove the paper following the procedure below. (1)Open the Rear Cover. (2)If you can see the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 155
    " on page 148 to confirm that you are using the correct paper and are loading it into the machine correctly. If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. Troubleshooting
  • Canon PIXMA MX7600 | Quick Start Guide - Page 156
    that you are using the correct paper and are loading it into the machine correctly. If you cannot remove a sheet of paper or a teared piece of paper inside the machine, or if the paper jam error continues after removing the paper, contact your Canon service representative. 152 Troubleshooting
  • Canon PIXMA MX7600 | Quick Start Guide - Page 157
    the jammed Reset button is pressed when the machine is scanning the document. If you press the Stop/Reset button during scanning, "Document in ADF. Press OK to discharge document." appears on the LCD. Press the OK button so that the remaining document is automatically fed out. Troubleshooting
  • Canon PIXMA MX7600 | Quick Start Guide - Page 158
    . When rescanning the document after clearing the error, rescan it from the first page. If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact your Canon service representative. Note The document may
  • Canon PIXMA MX7600 | Quick Start Guide - Page 159
    the document following the procedure below. (1)If printing is in progress, press the Stop/Reset button. (2)Turn off the machine. (3)If a multi-page document is loaded, remove any pages other than the jammed page from the ADF. (4)Open the Document Output Slot. (5)Open the Document Cover. (6)Insert
  • Canon PIXMA MX7600 | Quick Start Guide - Page 160
    . z When rescanning the document after clearing the error, rescan it from the first page. If you cannot remove the document or the document tears inside the machine, or if the document jam error continues after removing the document, contact your Canon service representative. The Machine Makes the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 161
    Information about the Network" in "Troubles When Using the Machine over Network" of the User's Guide on-screen manual. Printer port setting does not match the computer's interface connecting the machine. Check the printer port settings. * In the following instruction, "XXX" signifies your machine
  • Canon PIXMA MX7600 | Quick Start Guide - Page 162
    . Make sure that the type of loaded paper is suitable for automatic duplex printing on the Main sheet (Windows) or the Quality & Media sheet on the Print dialog box (Macintosh). z Manual duplex printing is not supported with the machine. „ Error Regarding Automatic Print Head Alignment Is Displayed
  • Canon PIXMA MX7600 | Quick Start Guide - Page 163
    in your setup sheet or the Network Setup Guide to reinstall the MP Drivers. „ Error Number: 1700 Is Displayed Cause The ink absorber is almost full. Action See ""The ink absorber is almost full. Press OK to continue printing. Contact the service center."" on page 136. „ Error Number: 2001 Is
  • Canon PIXMA MX7600 | Quick Start Guide - Page 164
    Is Displayed Cause The clear ink tank is empty. Action See ""The clear ink tank is empty. Replacing the ink tank is recommended." U045" on page 133. „ Ink Info Number: 1693 Is Displayed Cause The clear ink has run out. Action See ""The clear Ink has run out. Replace the ink tank." U165/U166" on
  • Canon PIXMA MX7600 | Quick Start Guide - Page 165
    the instruction manual of the device. For other troubles on the device, contact the manufacturer. Error Message On PictBridge Compliant Device "Printer in use" "No paper" "Paper jam" "Printer cover open" "No Print Head" "Waste tank full" / "Ink absorber full" "No ink" / "Ink cassette error" Action
  • Canon PIXMA MX7600 | Quick Start Guide - Page 166
    Problems „ ScanGear Won't Start Cause The scanner driver (ScanGear) is not installed. Action Follow the procedure described in your setup sheet or the Network Setup Guide to reinstall the MP Drivers. „ Other Scanning Troubles Refer to the Scanning Guide on-screen manual. 162 Troubleshooting
  • Canon PIXMA MX7600 | Quick Start Guide - Page 167
    " on page 95. z If the clear ink has run out, until the clear ink tank is replaced, the machine will not be able to print the received fax and will store it in its memory. The fax stored in memory needs to be printed manually. See "Printing a Document in Memory" on page 95. Troubleshooting 163
  • Canon PIXMA MX7600 | Quick Start Guide - Page 168
    Line for Fax Use Only:" on page 88. DRPD*1 See "If You Subscribe to a Distinctive Ring Pattern Detection (DRPD) Service with Your Telephone Company (US and Canada only):" on page back User's Guide on-screen manual. If ECM RX is enabled, the sender's fax machine resends the fax after correcting errors
  • Canon PIXMA MX7600 | Quick Start Guide - Page 169
    line or connection, reducing the reception start speed may correct the error. Reduce the reception start speed. Refer to "RX start speed" in "Device Settings" of the User's Guide on-screen manual. Contact the sender and check whether his/her fax machine is operating normally. Troubleshooting 165
  • Canon PIXMA MX7600 | Quick Start Guide - Page 170
    133. z Print the Activity report and check for an error. See "Printing the Activity Report Manually" on page 99. Check that the telephone line is connected correctly to the proper jack. If so, then there is a problem with your telephone line. Contact your telephone company. Remove the document then
  • Canon PIXMA MX7600 | Quick Start Guide - Page 171
    start speed may correct the error. Reduce the transmission start speed. Refer to "TX start speed" in "Device Settings" of the User's Guide on-screen manual. Telephone Problems „ Cannot Dial Cause Action The telephone line is not correctly connected. The telephone line type is not set correctly
  • Canon PIXMA MX7600 | Quick Start Guide - Page 172
    PC Printing Guide Refer to this guide for full instructions on printer driver setting. FAX Driver Guide (Windows only) Refer to this guide for full instructions on fax driver setting. PC Photo Printing Guide Refer to this guide for full instructions on using the various application software included
  • Canon PIXMA MX7600 | Quick Start Guide - Page 173
    Reading the On-screen Manuals For detailed instructions on installing the on-screen manuals, refer to your setup sheet or the Network Setup Guide. You can view the on-screen manuals in the following way: To view the on-screen manual, double-click the XXX On-screen Manual shortcut icon on the desktop
  • Canon PIXMA MX7600 | Quick Start Guide - Page 174
    My Printer (Windows only) This application helps you to operate this machine. Use this application to open the printer driver or the status monitor screen and confirm or change both the printer settings or status. Also, this application has a menu to provide troubleshooting tips when problems arise
  • Canon PIXMA MX7600 | Quick Start Guide - Page 175
    (D) x 257 (H) mm * With the Paper Support, Paper Output Tray, and Document Tray retracted. Approx. 16.6 kg (Approx. 36.6 lb.) * With the Print Head and ink tanks installed. Total 3,584 nozzles (BK/Y/PBK: each 512 nozzles, C/M: each 1,024 nozzles) z A4 or Letter size: Max. 35 sheets (20 lb / 75 gsm
  • Canon PIXMA MX7600 | Quick Start Guide - Page 176
    SHEET.) Halftones: 256 levels of gray Density adjustment: 3 levels Transmission/reception: Approx. 250 pages (Approx. 30 documents) (Based on ITU-T No.1 chart for US specifications and Canon FAX Standard chart No.1 for others, both in standard mode.) Black & white Standard: 8 pels / mm x 3.85 lines
  • Canon PIXMA MX7600 | Quick Start Guide - Page 177
    Camera Direct Print (PictBridge) 4" x 6" / 10 x 15 cm*2, 5" x 7"*1, *2, CreditCard / 5.4 x 8.6 cm*2, 8" x 10" / 20 x 25 cm*2, A4, 8.5" x 11" (Letter), 4" x 7.1" / 10.1 x 18 cm*2, *3 *1 Can be selected only on certain Canon-brand PictBridge compliant devices. *2 This paper cannot be fed from the
  • Canon PIXMA MX7600 | Quick Start Guide - Page 178
    To upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon inkjet printer. Users in Asia z ScanSoft OmniPage SE (OCR software) can work only with English operating system. Additional System Requirements for On-Screen Manuals Browser: Windows HTML Help Viewer Note
  • Canon PIXMA MX7600 | Quick Start Guide - Page 179
    money z Money orders z Certificates of deposit z Postage stamps (canceled or uncanceled) z Identifying badges or insignias z Selective service or draft papers z Checks or drafts issued by governmental agencies z Motor vehicle licenses and certificates of title z Traveler's checks z Food stamps
  • Canon PIXMA MX7600 | Quick Start Guide - Page 180
    power and unplug the power cord. The telephone line cable should not be reconnected or the main power switch turned ON until the problem is completely resolved. Users should contact their local authorized Canon Facsimile Service Dealer for the servicing of equipment. Information regarding Authorized
  • Canon PIXMA MX7600 | Quick Start Guide - Page 181
    clearly contains in a margin at the top or bottom of each transmitted page, or on the first page this guide. instructions radio/TV technician for help. Use of a manual. If such changes or modifications should be made, you could be required to stop operation of the equipment. Canon U.S.A., Inc. One Canon
  • Canon PIXMA MX7600 | Quick Start Guide - Page 182
    the user's manual or other documentation for the Product. (b) Use of parts, media, software or supplies (other than those sold by Canon USA), including nonCanon ink cartridges or refilled ink cartridges, that cause damage to the Product or cause abnormally frequent service calls or service problems
  • Canon PIXMA MX7600 | Quick Start Guide - Page 183
    WHOM IT WAS PURCHASED AS A GIFT, AND STATES YOUR EXCLUSIVE REMEDY. Canon USA offers a range of customer technical support* options: z Interactive troubleshooting, e-mail technical support, the latest driver downloads and answers to frequently asked questions (www.canontechsupport.com) z Toll-free
  • Canon PIXMA MX7600 | Quick Start Guide - Page 184
    also have other rights, which vary from state to state. * Support program specifics are subject to change without notice. ** InstantExchange warranty service is subject to the availability of refurbished or new replacement units. Canon U.S.A., Inc. One Canon Plaza Lake Success, NY 11042 USA ©2008
  • Canon PIXMA MX7600 | Quick Start Guide - Page 185
    Users in Canada „ Pre-Installation Requirements for Canon Facsimile Equipment Notice This equipment meets the applicable Industry Canada technical specifications. The Ringer Equivalence Number is an indication of the maximum number of devices
  • Canon PIXMA MX7600 | Quick Start Guide - Page 186
    Users in New Zealand The grant of a Telepermit for any item of terminal equipment or model, nor does it imply that any product is compatible with all of Telecom's network services. Telepermitted equipment only may be connected to the auxiliary telephone port. The auxiliary telephone port is
  • Canon PIXMA MX7600 | Quick Start Guide - Page 187
    168 B Before Using the Machine 6 C Canon U.S.A., Inc. Limited Warranty - U.S. A. only 178 Card Slot 37 Cleaning ADF 124 dirt on the machine 123 inside 126 Platen Glass and Document Cover 123 protrusions inside the machine 130 roller 125 sheet 128 Copying 32 E Error Message 133 F Faxing preparing 54
  • Canon PIXMA MX7600 | Quick Start Guide - Page 188
    184
  • Canon PIXMA MX7600 | Quick Start Guide - Page 189
    185
  • Canon PIXMA MX7600 | Quick Start Guide - Page 190
    186
  • Canon PIXMA MX7600 | Quick Start Guide - Page 191
    Ink Tanks PGI -9 Photo Black PGI -9 Cyan PGI -9 Magenta PGI -9 Yellow PGI -9 Clear PGI -7 Black Canon Specialty Papers Fine Art Photo Rag (8.5" x 11"/ 20 sheets) Glossy Photo Paper Credit Card Size (100 sheets) High Resolution Paper (8.5" x 11"/ 100 sheets) Matte Photo Paper (4" x 6"/ 120 sheets
  • Canon PIXMA MX7600 | Quick Start Guide - Page 192
    The following ink tanks are compatible with this product. For information on product specifications, please visit our website at www.usa.canon.com QT5-0080-V01 XXXXXXXX © CANON INC. 2008 PRINTED IN THAILAND
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
Quick Start Guide
Office All-In-One
series