Canon PIXMA TS3522 TS3500 series User Manual - Page 224

1. Roll up paper in opposite direction to paper curl as shown below. 2. Check that paper is now flat. We recommend printing curl-corrected paper one sheet at a time. Note • Depending on paper type, the paper may smudge or may not feed properly even if it is not curled inward. Follow the instructions below to curl the paper outward up to 0.1 in. / 3 mm (C) in height before printing. This may improve the print result. (B) Print side We recommend feeding paper that has been curled outward one sheet at a time. Check4 If brightness is set low, increase brightness setting and try printing again. (Windows) If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become wavy, causing paper abrasion. Adjusting Brightness Check5 Is platen glass dirty? Clean the platen glass. Cleaning Platen and Document Cover Check6 Make sure original is properly loaded on platen. When you load the original on the platen, load it with the side to be copied facing down. Loading Originals Check7 Is inside of printer dirty? 224