Canon PIXMA iP5200 Service Manual - Page 12
Service Call Errors by Cyclic Blinking in Orange Alarm LED and Green, Power LED - ink refills
View all Canon PIXMA iP5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
11 times Failed in automatic print head alignment. [2500] button to eject the paper being used at error occurrence. Printing will resume from on the front side of the next page. paper at error occurrence is skipped (not printed). Press the Resume/Cancel button. The error is - If paper is being fed at error indicated when occurrence, the error is indicated after the pattern is not the paper is ejected. printed due to no - If the error occurs, the print head ink or non- alignment values are not changed. ejection of ink, or - After exit from the error by the when the Resume/Cancel button, the automatic sensor's AD print head alignment will not be re- value is done. incorrect. 13 times The remaining ink amount unknown. [1683] An ink tank which has once been empty Printing with a is installed. Replace the applicable ink once-empty or tank with a new one. refilled ink tank can damage the print head. If printing is continued without replacing the "nogood" ink tank, press the Resume/Cancel button for 5 sec. or longer to record the use of a refilled ink tank. Note: After the above operation, the function to detect the remaining ink amount is disabled. 14 times Ink tank not recognized. [1684] A non-supported ink tank is installed (the ink tank LED is turned off). Install the supported ink tanks. 15 times Ink tank not recognized. [1410 An error occurred in an ink tank (the ink to 1419] tank LED is turned off). Replace the ink tank(s). No Access cover open. [1200] blinking Close the access cover. *1: Only for models supporting CD / DVD printing *2: Only for models not supporting CD / DVD printing 2-2. Service Call Errors (by Cyclic Blinking in Orange (Alarm LED) and Green (Power LED), or Alarm LED Lit in Orange) Cycles of blinking in orange (Alarm LED) and green (Power Error [Error code] Solution (Replacement of listed parts, which are likely to be faulty) 1-7