Canon PIXMA iP5200 Service Manual - Page 42

2. CLEANING MODE AND AMOUNT OF INK PURGED To prevent printing problems due to bubbles, dust, or ink clogging, print head cleaning is performed before the start of printing (when the cleaning flag is on), except in the following cases: - Cleaning on arrival: Performed when the access cover is closed. - Manual cleaning / deep cleaning: Performed manually. Black: Pigment-based black Color: Dye-based black, cyan, magenta, yellow Condition Details On arrival of the First to third cleaning after shipped printer from the plant. Amount of ink used (g) (in the normal temperature/humidity environment) Est. required time (sec.) (not including the time of opening the caps) 0.57 (Black) 100 2.25 (Color) (All in sequence) Dot count cleaning (Blackのみ) When the specified number of dots are printed since the previous Black cleaning. 0.20 (Black) 35 (Black) Timer cleaning 0*1 (Black only) If 24 to 60 hours have elapsed since 0.20 (Black) the previous Black cleaning till the start of the next printing. Timer cleaning - 1 If 60 to 96 hours have elapsed since (Black only) the previous Black cleaning till the start of the next printing. Timer cleaning - 2 If 96 to 120 hours have elapsed since (Black only) the previous Black cleaning till the start of the next printing. Timer cleaning 3*2 (Black/Color) If 120 to 336 hours have elapsed since the previous Black/Color cleaning till the start of the next printing. Timer cleaning - 4 If 336 to 504 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. Timer cleaning - 5 If 504 to 720 hours have elapsed (All in sequence) since the previous Black/Color cleaning till the start of the next printing. 0.20 (Black) 0.66 (Color) 0.57 (Black) 1.06 (Color) 2-2 35 (Black) 35 (Black) 40 (Color) 80 80