Canon PIXMA iP6210D iP6210D Direct Printing Guide - Page 37

About transmittable data It does not support printing a downloaded content or photo and a photo attached to an E-mail for security reason. It does not support printing video files. Depending on your device, it may not print data stored in a memory card. Depending on the size of a photo, it may take a while for this printer to start to print after starting the infrared transfer. It automatically sets the photo quality and orientation (horizontal or vertical) according to the photo size. It automatically sets to the margin according to the photo size. Changing the Bluetooth Settings-Bluetooth settings You can change the Bluetooth settings such as the device name of a printer and passkey. 1 Turn on the printer. 2 Connect the Bluetooth unit BU-20 to direct print port. BLUETOOTH SET cannot be selected until the Bluetooth unit is connected. 3 Press the Configuration button repeatedly to select the BLUETOOTH SET and then press the OK button. 4 Change the setting. Use the buttons to select the setting item you want to change and then press the OK button. Setting Items • DEVICE NAME: • ACCESS REFUSAL: • SECURITY: • PASSKEY: Select the device name of this printer displayed on the screen of the Bluetooth devices. When you set iP6210D-2, the printer name on the Bluetooth device is "Canon iP6210D-2". The initial value is set to iP6210D-1. Selecting ON will disable search for this printer from Bluetooth devices. Selecting ON will enable a passkey. Setting a passkey will prevent incorrect access from other Bluetooth devices. You can change the passkey. The passkey refers to an identification number to be determined. It is used to prevent incorrect access from other Bluetooth devices. The initial value is set to "0000". After you change the pass key, you are require to enter the new passkey again. Enter the new passkey to the Bluetooth device. 33