Canon PowerShot N100 Camera User Guide - Page 33
Still Images/Movies, Still Images, Movies
View all Canon PowerShot N100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Still Images/Movies • If the camera is turned on while the button is held down, the camera will no longer sound. To activate sounds again, press the button and choose [Mute] on the [3] tab, and then press the buttons to choose [Off]. Still Images • A blinking [ ] icon warns that images are more likely to be blurred by camera shake. In this case, mount the camera on a tripod or take other measures to keep it still. • If your shots are dark despite the flash firing, move closer to the subject. For details on the flash range, see "Flash Range" (=204). • The subject may be too close if the camera only beeps once when you press the shutter button halfway. For details on the focusing range (shooting range), see "Shooting Range" (=204). • To reduce red-eye and to assist in focusing, the lamp may be activated when shooting in low-light conditions. • A blinking [h] icon displayed when you attempt to shoot indicates that shooting is not possible until the flash has finished recharging. Shooting can resume as soon as the flash is ready, so either press the shutter button all the way down and wait, or release it and press it again. • The shutter sound will not be played when the Sleeping and Babies (Sleeping) icons (=34) are displayed. • Although you can shoot again before the shooting screen is displayed, your previous shot may determine the focus, brightness, and colors used. • You can change how long images are displayed after shots (=52). Movies • The camera may become warm when shooting movies repeatedly over an extended period. This does not indicate damage. Microphone • Keep your fingers away from the microphone while shooting movies. Blocking the microphone may prevent audio from being recorded or may cause the recording to sound muffled. • Avoid touching camera controls other than the movie button when shooting movies, because sounds made by the camera will be recorded. • Once movie recording begins, the image display area changes and subjects are enlarged to allow for correction of significant camera shake. To shoot subjects at the same size shown before shooting, adjust the image stabilization setting (=85). • Audio is recorded in stereo. • Distorted audio caused by recording when the wind is strong can be reduced. However, the recording may sound unnatural when this option is used when there is no wind. When the wind is not strong, choose MENU (=26) > [4] tab > [Wind Filter] > [Off] (=26). Before Use Basic Guide Advanced Guide Camera Basics Auto Mode Hybrid Auto / Dual Capture Mode Other Shooting Modes P Mode Playback Mode Wi-Fi Functions Setting Menu Accessories Appendix Index 33