Canon PowerShot SD430 Wireless Setup Guide - Page 7
Check If Required Software Is Installed - digital camera
View all Canon PowerShot SD430 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
• Key Index (Transmit Key) 1 2 3 4 7 The Key Index is a key that is set when the Network Authentication/ Data Encryption setting is WEP. Up to four keys can be set for one access point. Please place a check mark beside the key index used by your wireless network. If you are using an AirPort network, select [1]. If you are using an AirPort network: You can check the password by selecting your base station in the AirPort Admin Utility and clicking the [key] icon in the window. Check If Required Software Is Installed Before configuring the wireless settings, confirm that the following software has been installed. Checking if the Software Supplied with the Camera Has Been Installed Check to see if the software supplied with the camera has been installed. If it is not installed, use the supplied Canon Digital Camera Solution Disk and install it according to the procedures in Using the Software on the Macintosh Platform-Preparations (p. 47) in the Software & Wireless Guide. Installing the ImageBrowser Wireless Updater Download the ImageBrowser Wireless Updater from the same website you downloaded this guide from. Download 1 Confirm that ImageBrowser is installed on the computer. ImageBrowser is normally installed if you have installed the software supplied with your camera. If it is not installed, install it according to the procedures in Using the Software on the Macintosh Platform-Preparations (p. 47) in the Software & Wireless Guide.