Canon PowerShot TX1 PowerShot TX1 Camera User Guide Advanced - Page 136
Using an Externally Mounted Flash, Sold Separately
![]() |
UPC - 013803076790
View all Canon PowerShot TX1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Using an Externally Mounted Flash (Sold Separately) High-Power Flash HF-DC1 This flash is used to supplement the camera's built-in flash when the subject is too far away for proper illumination. First open the LCD monitor of the camera, and firmly fix the camera and the high power flash with the supporting bracket as shown in the diagram below, and then shoot. Please read the instructions accompanying the flash along with this explanation. Tripod Sockets Bracket (Comes with the flash) z The flash charge time will lengthen as the battery charge gets weaker. Always set the power/mode switch to [OFF] when you finish using the flash. z Be careful not to touch the flash window or sensor windows with your fingers while the flash is in use. z The flash may fire if another flash is being used in close proximity. z The High-Power Flash may not fire outdoors in daylight or when there are no reflective items. z For continuous shooting, although the flash fires for the first shot, it does not fire for subsequent shots. z Fasten the attachment screws securely so that they do not loosen. Failure to do so may lead to the dropping of the 134 camera and flash resulting in damage to both.
![](/manual_guide/products/canon-powershot-tx1-powershot-tx1-camera-user-guide-advanced-1ce9df8/136.png)