Canon RC-IP00 Remote Camera Controller User Manual - Page 4

Getting Started Main Features The following are the features when this unit is used in combination with a remote camera. Simple Operation with LCD Touch Panel Equipped with full color LCD touch panel, which makes operation easy through its versatile screen configuration. Operate Camera Freely with Control Lever and Customized Buttons Equipped with a control lever and customized buttons assignable with functions, which enhances the operability of the camera. Also enables smooth pan/tilt operation. Controls up to 100 remote camera units This unit can be used to control up to a maximum of 100 remote camera units. One of the remote cameras can be connected or controlled via serial communication (RS-422). Precautions Storage and Usage Locations This unit is exclusively designed for in-door use. Avoid using or placing this unit in the following places. It might result in malfunctions or failure. 0 Hot or cold places that are beyond the allowable operating temperature range (0 °C to 40 °C (32 °F to 104°F)). 0 Locations beyond or below the allowable operating humidity range of 20 %RH to 90 %RH. (Condensation is not allowed) 0 Near equipment that emits strong magnetic fields, such as transformers or motors. 0 Near equipment that emits radio waves, such as transceivers and mobile phones. 0 Locations with excessive dust and sand. 0 Locations prone to moisture such as window side. 0 Locations that are subjected to radiation, X-rays, salt attack or corrosive gases. 0 Places subject to smoke or vapor such as near a cooking stove 0 Places subject to strong vibrations or unstable surfaces Do not leave this unit in a parked car under direct sunlight or near a heater for long hours. Protect this unit against penetration of dust when using it in a place subject to sandy dust. Handling Precautions Do not rub against or press the surface of the touch panel with a knife or a sharp object. Do not apply excessive force to this unit; do not lift this unit while holding the control lever. Maintenance Turn off the power before performing any maintenance. Wipe using a soft cloth. Wiping with thinner or benzene may melt or tarnish its surface. For tough stains, wipe using a cloth that is dipped into a neutral detergent diluted with water, followed by wiping with a dry cloth. Cautions on Installing this Unit on a Desktop Install this unit such that it does not fall from the desktop due to vibrations. Energy Saving When this unit is not in use, set the Power switch to "OFF" to reduce power consumption. Trademark Product names and company names indicated in this manual are trademarks or registered trademarks of the respective companies. Disclaimer Do not use any AC adapter other than the AC adapter that comes bundled with this product. The bundled AC adapter and power cord are to be used with this product only. They cannot be used with other equipment. Disposal When disposing of this product, do so appropriately by following the applicable laws, regulations and local laws. 4 Main Features