Canon REALiS WUX4000 D Pro AV Multimedia Projector WUX5000 / WUX4000 User's Ma - Page 160
Cleaning the Air Filter, Securely insert the air filter all the way, into the projector.
View all Canon REALiS WUX4000 D Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Cleaning and Replacing the Air Filter 5 Securely insert the air filter all the way into the projector. • Handle the air filter carefully. If damaged, the air filter will not work properly. • When the lamp is replaced, it is recommend that you also replace the air filter. • Contact the Canon Customer Support Center for further information. • Replacement air filter part No.: RS-FL01 Cleaning the Air Filter The air filter protects the lens and mirror inside the projector from dust and dirt. Should the air filter become clogged with dust, the projector may be damaged since it will block the air flow into the projector and raise the internal temperature of the projector. The following screen is displayed when turning on the projector if the air filter needs to be cleaned (after approx. 300 hours). Clean the air filter if such is the case. • Only the [ ], [ ], OK and POWER buttons are available while this screen is displayed. (When you press the POWER button, the message "Push POWER button again to turn off power" appears.) • After this screen has been displayed for 10 seconds and disappeared, all buttons become operable. • Hook your finger into the air filter handle on the side of the projector, and remove the air filter. Then use a vacuum cleaner to remove the dust. • Bring the vacuum cleaner nozzle directly close to the side intake vent and the bottom exhaust vent in order to clean them. • If the filter replacement screen is displayed when turning on the projector after cleaning the air filter, select [Yes] and press OK. The filter replacement screen will disappear. 160