Canon REALiS WUX6000 Pro AV User Manual - Page 104
Requiring a Password for Operation, To Cancel the Password
View all Canon REALiS WUX6000 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Customizing System Operation (System Settings) Requiring a Password for Operation > [System settings] > [Other settings] > [Password settings] HDMI Digital PC Component Analog PC LAN USB Disables the projector unless the correct password is entered. To Cancel the Password • Cancellation on the Projector Turn off the projector and unplug the power plug. Hold down the MENU button on the side control and connect the power plug. Make sure to keep holding down the MENU button until a beep sounds. When the beep sounds, the password is canceled. (The entered password is also reset.) • Cancellation on the Remote Control To forcibly cancel the password from the remote control, in standby state press the MENU button 3 times, then press the POWER button. Off The projector can be used even if no password is entered. On The projector cannot be used unless you enter your password. Press the OK button to accept your setting and then press the MENU button. • [Off] is the factory default. • You cannot set [On] unless you have completed [Register password]. Once you set a password, the password entry screen appears at power-on. Enter a 4 digit password. Enter the password using the buttons. If the password is valid, the projection starts. If you enter a wrong password three times, the power will be turned off. • The power is also turned off if no password is input for 3 minutes. 104