Canon REALiS WUX6000 Pro AV User Manual - Page 123
Insert the projector lens cable into the connector until a click sound is, Reinstall the sleeve
View all Canon REALiS WUX6000 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 123 highlights
Installation and Maintenance Installation Installation Procedure 8 Insert the projector lens cable into the connector until a click sound is heard. 9 Reinstall the sleeve, cosmetic panel, and lamp cover in their original positions. When the power is first turned on after the lens unit has been installed or replaced, lens shift initialization operation will be performed. It will take approximately 1 minute for the initialization operation to start up. However, if the lens has been replaced with a lens of the same model number, initialization operation will not be performed. The position will be the same as before the lens was replaced. The lens shift initialization operation uses the motor to move the lens up / down / left / right. Do not touch the lens. Doing so could result in an injury. When installing and removing the lens unit, be sure to fix the lens cable as shown in the illustration. When inserting the lens unit, it is possible to damage the lens cable between the lens unit and projector. 123