Canon REALiS WUX6000 Pro AV User Manual - Page 24
Operating temperature: 0°C 32°F to 40°C 104°F Humidity level: up
View all Canon REALiS WUX6000 Pro AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
For Safe Use Pay attention to the following points when installing or using the projector. • Do not touch the lens with bare hands. Doing so may result in deterioration of image quality. • If the projector is suddenly moved from a location where the temperature is low to a location where the temperature is high, or if the temperature in the location where the projector is installed increases suddenly, moisture in the air could cause condensation to form on the projector lens or mirror. This may cause a blurred image. Wait until the condensation has evaporated for the image projected to return to normal. • Do not install the projector in a location where the temperature is high or low. Doing so may cause a malfunction. The temperature range for operation and storage are as follows. Operating temperature: 0°C (32°F) to 40°C (104°F) Humidity level: up to 85% Storage temperature: -10°C (14°F) to 60°C (140°F) • Do not place any objects on top of the projector that may change shape or color due to heat. • When using the projector at altitudes greater than 2,300 m (7,545.8'), or for projecting upward / downward: When using the projector at altitudes greater than 2,300 m (7,545.8'), or for upward projection or downward projection, it is necessary to change the settings of the projector. Specifically, adjust [Fan mode] (P146) or [Vertical projection] (P147) in the [Install settings] menu. • Do not install the projector near high-voltage electrical power lines or an electrical power source. • Do not use the projector on a soft surface such as carpet or sponge mat, etc. Doing so could cause heat to build up inside the projector and this could result in a malfunction. • Do not block the air intake or exhaust vents of the cooling fan. If the air intake or exhaust vent is blocked, heat cannot be released from inside the projector, which may shorten the useful life of the lamp or cause malfunction. • Installing the projector in the wrong direction may cause a malfunction or accident. Ensure that the left or right side of the projector is not tipped up more than 10°. • Be sure to install the projector in a location where the air intake and exhaust vents are separated from the wall by more than 50 cm (1.6'). Failure to do so could cause a malfunction. • Do not install the projector in a location that is damp, or where there is a lot of dust, oily smoke or tobacco smoke. Doing so could cause contamination of optical components such as the lens and the mirror and may result in deterioration of image quality. 24