Canon REALiS WX520 Pro AV User Manual - Page 154

Installation-Related Menu Settings Specifying a Menu Position Showing/Hiding the Guide Screen > [Install settings] > [On screen] > [Menu position] HDMI Digital PC Component Analog PC LAN USB You can change the position of menus displayed. > [Install settings] > [On screen] > [Guide] HDMI Digital PC Component Analog PC LAN USB You can select whether to show or hide the guide screen which explains operations. Use the buttons to move the menu to the desired position. Off Hides the guide screen. On Shows the guide screen. After you have moved the menu to the desired position, press the OK button to accept your setting, and then press the MENU or EXIT button. Press the OK button to accept your setting and then press the MENU button or EXIT button. • The factory default is [On]. • The guide screen is shown at the following times. - When no input signal can be detected. (P145) - When an invalid button is pressed in the [BLANK], [FREEZE] or [D.ZOOM] mode. (P76, P78) - When the positional lock is set to [On]. (P146) - When the projector is already on and the POWER button is pressed again. 154