Canon SELPHY Square QX10 Getting Starte - Page 101

Lamp indications STATUS lamp Off Blinks slowly white Blinks white Blinks quickly white Lights white CHARGE lamp Off Blinks slowly green Lights green Off Off Off Off Status Power off (Not charged) Charging in progress (Power off) Charging complete (Power off)*1 Printer start-up in progress Processing... Remove the printed paper. Standing by to print (Not charged)*2 Blinks green Standing by to print (Battery level low) Blinks slowly red Blinks red Blinks slowly green Lights green Blinks slowly green Off Blinks green Blinks quickly red Off Blinks quickly green Standing by to print (Charging in progress) Standing by to print (Charging complete) Outside the operating temperature range so charging has paused. An error occurred. Check the app message. The battery level is low so printing is not possible. Charge the battery. An error occurred. Turn the power off and then on again. A battery error occurred. *1 After a while, the CHARGE lamp turns off. *2 You can check the battery level by pressing the Power button in the Standing by to print (Not charged) status. • CHARGE lamp blinks two times: The battery level is low, but the printer can still be used. • CHARGE lamp blinks three times: The battery level is sufficient. 5