Canon Sure Shot 130u Instruction Manual - Page 36
Troubleshooting
View all Canon Sure Shot 130u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Troubleshooting In case of problems, check the table below before aking your camera to be repaired. Problem F=, blinks on the LCD panel. is not displayed on the LCD panel. The lens is not set. "0" blinks on the frame counter. The shutter does not release. The photographs are blurred. Solution • Replace the battery. (-*10) • Load the battery. (-*10) • Reload the battery correctly. (-*10) • Replace the battery. (-*10) • Reload the battery correctly. (-010) • Reload the film correctly. (-*11) • Turn the power on. (-O3) • Replace the battery. (-O0) • Reload the film correctly. (-O1) • Remove the film and load a new one. (-O1, 12) • Hold the shutter button down until the shutter releases. (-*15) • Change the flash mode. (-*22) • Ensure that the AF sensor is not obscured by your hair, fingers etc. ( 19) • Make sure that you do not stand directly in front of the camera when pressing the shutter button. (-*21) • Press the shutter button slowly and gently. (-*15) • Wipe the AF sensor clean. (-*6) E-36