Canon VB-M741 LE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB - Page 209
Auto Flip and View Restriction Settings
View all Canon VB-M741 LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 209 highlights
Setting view restrictions automatically restricts the camera operating angle. At wide-angle, the camera operating angle would allow capture outside the view restrictions if the angle remained the same. Therefore, it is narrowed automatically. Camera Restricted view angle Camera operating angle Captured video range • If the view restriction will be exceeded as a result of zooming toward wide-angle, the camera will first pan and tilt to a position where the maximum wide-angle zoom will be within the viewing restriction area. Wide-angle zoom control will then be enabled within the view restriction area. Captured video First, the center of the maximum wide-angle zoom is panned and tilted. After panning and tilting, wide-angle zoom control is enabled within the view restriction. Restricted view angle 6 Admin Tools Zoom out Zoom out • Reducing the view restriction may also reduce the zoom range. Auto Flip and View Restriction Settings Under the following conditions, when the View Restriction Setting Tool is launched or [Restore settings] is clicked, a message appears indicating that the view restriction setting values are disabled and (warning icon) appears to the left of the [View Restriction Settings] setting value input box. Conditions • [Apply the view restriction] is selected. • [Camera] > [Camera Settings] > [Camera Control] > [Auto Flip] is set to [Enable] in the Setting Page (P. 76). • When [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] is set to [Disable] in the Setting Page (P. 78): [Lower Limit], [Left Limit], or [Right Limit] has been entered for [View Restriction Settings]. • When [Camera] > [Camera Settings] > [Installation Conditions] > [Image Flip] is set to [Enable] in the Setting Page (P. 78): [Lower Limit], [Left Limit], or [Right Limit] has been entered for [View Restriction Settings]. [Save settings] is clicked when [View Restriction Settings] is enabled. Under the above conditions, a message also appears indicating that Auto Flip is disabled when [Save settings] is clicked. When you click [OK] in the message, Auto Flip is disabled and the [View Restriction Settings] are saved. 209