Canon VB-M741 LE Network Camera VB-R11VE/VB-R11/VB-R10VE/VB-M641VE/VB-M641V/VB - Page 221
How to Con Abandoned Object Detection, Detection, tatus for Moving Object Detection
View all Canon VB-M741 LE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 221 highlights
Detection Status for Moving Object Detection All moving objects detected are shown with contour lines. If a moving object is smaller than [Object Size (%)], its contour lines are white. If the moving object is larger than [Object Size (%)], its contour lines take on the same color as the detection area, indicating that "detected" mode has been triggered. Contour Lines of Detected Moving Object Note If an object is placed in or removed from the moving object detection area, "detected" mode will be triggered for Moving Object Detection. 6 Admin Tools How to Configure Abandoned Object Detection Set the area you want to detect a placed object in as a detection area. 1 Select [Rectangular] or [Polygonal]. 2 Use the video display area to configure the area where you would like to detect abandoned objects (P. 219). 3 Configure the size of the object needed for triggering detection in [Object Size (%)]. This determines how large the abandoned object must be in relation to the detection area you set in step 2 for abandoned object detection to be triggered. When the setting values or slider is changed, an indicator frame representing the object size is displayed for one second in the center of the video display area allowing you to check the size ratio while specifying the setting. Object Size Indicator Detection Area 4 Configure [Duration (Sec)] for the time required for an object to be detected as an abandoned object. 221